Thanks for Registering Your FLEXiO 5000
Please see below for helpful content to make sure you have a great experience
How-To Videos
Troubleshooting Videos
Charts & Guides
Material Compatibility
These materials are best suited for your FLEXiO 5000
MATERIAL | COMPATIBILITY |
---|---|
Wood Stain | Ideal Performance* |
Semi-Transparent Stain | Ideal Performance* |
Solid Stain | Ideal Performance |
Paint & Primer | Ideal Performance |
Which Nozzle Should You Use?
iSpray Nozzle
Applies a textured finish, similar to a roller
Great for:
- Walls
- Fences
- Decks
- Home Exteriors
Detail Finish Nozzle
Applies a smooth finish
Great for:
- Trim
- Cabinets
- Furniture
iSpray Nozzle Power & Material Settings Guide
Detail Finish Nozzle Power & Material Settings Guide
COATING | MATERIAL FLOW | AIR POWER |
---|---|---|
Transparent/Semi-Trans. Stains, Sealers | 2 | Low |
Lacquers (water-based) | 3 | Low |
Solid Stains | 4-6 | Low-Medium |
Polyurethane | 4-6 | Low-Medium |
Oil Enamels | 7 | Medium |
Latex Paints + Primers, Latex Paints | 9-11 | Medium-High |
Oil or Latex Primers | N/A | N/A |
COATING | MATERIAL FLOW | AIR POWER |
---|---|---|
Transparent/Semi-Trans. Stains, Sealers | Med/Heavy | Low |
Lacquers (water-based) | Med/Heavy | Low |
Solid Stains | Medium | Low-Medium |
Polyurethane | Med/Heavy | Low-Medium |
Oil Enamels | Heavy | Medium-Heavy |
Latex Paints + Primers, Latex Paints | Heavy* | High |
Oil or Latex Primers | N/A | N/A |
Spraying Technique
Air Cap Position for Spray Patterns
Adjust the position of the air cap on the nozzle to change the spray pattern to your desired position
Horizontal Spray Pattern
Vertical Spray Pattern
Spraying Techniques
Distance From Surface
Position spray gun perpendicular to and 6-8″ from the surface
Overlap Each Pass
When spraying large surfaces, overlap each pass by at least 50%.
Correct Spray Technique
Spray with smooth passes at a consistent speed. Do not flex wrist when spraying
Spray Pattern Guide
Here are some ways to troubleshoot any issues with your spray pattern if they come up
SPRAY PATTERN | IMAGE | SOLUTIONS | |||
---|---|---|---|---|---|
Clumpy Finish | Too little air and too much material. Turn up the air flow and turn down the material flow. | If adjusting the settings does not work, try adding Wagner Paint Easy to latex paint to condition it for a smoother spray pattern. | NOTE: The iSpray nozzle produces a roller-like finish. For a fine finish on small projects like furniture, use the Detail Finish nozzle. | ||
Runs & Sags | Too much air and too much material. Turn down the air flow and the material flow. | Spray gun is too close to the surface. Take a step back and hold it 6-8″ away. | Moving too slow. Move faster while remaining steady. | ||
Poor Coverage | Too little air and too little material. Turn up the air flow and turn up the material flow. | Spray gun is too far from the surface. Take a step closer and hold it 6-8″ away. | Moving too fast. Move slower while remaining steady. | If adjusting the settings does not work, try adding Wagner Paint Easy to latex paint to condition it. | |
Good Spray Pattern | Settings are adjusted properly, sprayer is 6-8″ away from the surface and is moving at a steady speed. |
What’s in the Box?
There are a few extra pieces included with your main sprayer components. Here is a quick explanation of how to use them.
CUP LINERS | CLEANING BRUSH | PETROLEUM JELLY |
---|---|---|
•Place the cup liner in the cup and ensure it is evenly distributed around the perimeter, then pour in your material •Remove the cup liner after each use for easy cleanup •Save paint by pouring excess paint back into the can •You can order more here | •This brush is helpful when cleaning small areas of your sprayer such as the pick up tube and around the nozzle •Great for scrubbing off dried paint | •This packet contains petroleum jelly for lubricating the (c) O-ring and (d) nozzle seal to make it easier to attach & remove the nozzle from the sprayer •Apply with a cotton swab or cotton ball as needed •Once this runs out, you can use any petroleum jelly |
Manual
FLEXiO 5000 Product Manual
Parts & Accessories
Projects
Contact Wagner
Call & Chat Hours: Mon-Fri 8am-4:30pm CST
Support Center
Product Support
Need support for your Wagner product? We can help! Connect with us via chat, phone, email and self-help.
Manuals
Find owner’s manuals for Wagner products.
Find A Service Center
Find a service center near you for your Wagner product.