W Flexio 3500 wNozzle 600x600.jpg
Wagner Logo

FLEXiO 3500 Product Support

How-To Videos


Troubleshooting Videos


Charts & Guides

Material Compatability

These materials are best suited for the FLEXiO 3500

MATERIALCOMPATIBILITY
Wood StainIdeal Performance*
Semi-Transparent StainIdeal Performance*
Solid StainIdeal Performance
Paint & PrimerIdeal Performance
*Detail Nozzle Recommended
Gen2Ispray600x600.jpg

iSpray Nozzle

Applies a textured finish, similar to a roller

Great for Broad Surfaces:

  • Walls
  • Decks
  • Fences
  • Home Exteriors
Detail Finish Nozzle 1 600x600.jpg

Detail Finish Nozzle

Applies a smooth finish

Great for:

  • Trim
  • Cabinets
  • Furniture
iSpray Nozzle Power & Material Setting Guide

Detail Finish Nozzle Power & Material Setting Guide

COATINGMATERIAL FLOWAIR POWER
Transparent/Semi-Trans. Stains, Sealers2Min-2
Lacquers (water-based)3Min-2
Solid Stains4-62-4
Polyurethane4-63-5
Oil Enamels74-6
Latex Paint+ Primers, Latex Paint9-115-8
Oil or Latex Primers9-116-Max
COATINGMATERIAL FLOWAIR POWER
Transparent/Semi-Trans. Stains, SealersMed/HeavyMin-3
Lacquers (water-based)Med/HeavyMin-3
Solid StainsMedium2-4
PolyurethaneMed/Heavy3-6
Oil EnamelsHeavy5-8
Latex Paint+ Primers, Latex PaintHeavy*6-Max
Oil or Latex PrimersHeavy*6-Max
*Material may need to be thinned. Try Wagner Paint Easy for a smooth, consistent finish

Spraying Technique

Air Cap Position for Spray Patterns

Adjust the position of the air cap on the nozzle to change the spray pattern to your desired position

Horizontal Spray Pattern
W QX5 iSpray Nozzle Fan Pattern Horz
Vertical Spray Pattern
W QX5 iSpray Nozzle Fan Pattern Vert
Spraying Techniques
Distance From Surface

Position spray gun perpendicular to and 6-8″ from the surface

Spray technique 2500
Overlap Each Pass

When spraying large surfaces, overlap each pass by at least 50%

Overlap
Correct Spray Technique

Spray with smooth passes at a consistent speed. Do not flex wrist when spraying

Parallel

Spray Pattern Guide

Here are some ways to troubleshoot any issues with your spray pattern if they come up

SPRAY PATTERNIMAGESOLUTIONS
Clumpy FinishClumpy FinishToo little air and too much material. Turn up the air flow and turn down the material flow.If adjusting the settings does not work, try adding Wagner Paint Easy to latex paint to condition it for a smoother spray pattern.NOTE: The iSpray nozzle produces a roller-like finish. For a fine finish on small projects like furniture, use the Detail Finish nozzle.
Runs & SagsRuns and SagsToo much air and too much material. Turn down the air flow and the material flow.Spray gun is too close to the surface. Take a step back and hold it 6-8″ away.Moving too slow. Move faster while remaining steady.
Poor CoverageWeak SprayToo little air and too little material. Turn up the air flow and turn up the material flow.Spray gun is too far from the surface. Take a step closer and hold it 6-8″ away.Moving too fast. Move slower while remaining steady.If adjusting the settings does not work, try adding Wagner Paint Easy to latex paint to condition it.
Good Spray PatternGood Spray PatternSettings are adjusted properly, sprayer is 6-8″ away from the surface and is moving at a steady speed.

What’s in the Box?

There are a few extra pieces included with your main sprayer components. Here is a quick explanation of how to use them.

CUP LINERSCLEANING BRUSHPETROLEUM JELLY
W Cup Liners HEROCleaning BrushPetroleum Jelly (1)
•Place the cup liner in the cup and ensure it is evenly distributed around the perimeter, then pour in your material
•Remove the cup liner after each use for easy cleanup
•Save paint by pouring excess paint back into the can
•You can order more here
•This brush is helpful when cleaning small areas of your sprayer such as the pick up tube and around the nozzle
•Great for scrubbing off dried paint
•This packet contains petroleum jelly for lubricating the (c) O-ring and (d) nozzle seal to make it easier to attach & remove the nozzle from the sprayer
•Apply with a cotton swab or cotton ball as needed
•Once this runs out, you can use any petroleum jelly

Manual


Parts & Accessories


Projects

Contact Wagner

Call & Chat Hours: Mon-Fri 8am-4:30pm CST

Support Center

Product Support

Need support for your Wagner product? We can help! Connect with us via chat, phone, email and self-help.

register your product icon

Manuals

Find owner’s manuals for Wagner products.

manuals icon

Find A Service Center

Find a service center near you for your Wagner product.

service center icon