505e Handheld Steamer Registration Confirmation

Helpful Videos

There are a variety of areas around your home that you can steam with your 505e Steamer. Check out the included accessories below and ways to use them.

ACCESSORY	USE
A. Extension Nozzle	Achieve extended reach
B. Cloth Cover	Wraps around upholstery nozzle
C. Upholstery Nozzle	Attach the cloth cover to steam fabric car seats, upholstery, remove wrinkles from clothing and curtains or kill dust mites in mattresses
D. Squeegee Adapter	Windows (home and auto), glass shower doors, shower walls, fireplace doors, etc.**
E. Brass Brush	Scrub and remove grease and grime found on grills and ovens
F. Nylon Brushes	Scrub faucets, sinks and grout
G. Angled Nozzle	Kitchen/bathroom sinks, other fixtures and hard to reach places
H. Flexible Hose	Get into hard to reach places with extended reach.
I. Measuring Cup	Measure how much distilled water you put in the steamer (tank holds up to 40 oz)
J. Funnel	Remove the black cap and place the fill funnel inside to easily fill the steamer tank with distilled water

**Do not use on glass when temperature is below 32˚ F (0˚ C). Glass may crack in cold temperatures.

Steam Time Chart

AMOUNT OF WATER*	DURATION OF STEAM
8 oz / 250ml	Approx. 15 minutes

*Recommend use distilled water. Tap water can cause mineral build up and impact the longevity of your steamer.

Attaching the Accessories

Installing the Long Nozzles

Hold the pipe section of the extension nozzle/upholstery nozzle in your hand.
Align the arrow on the accessory with the single line mark on the short spray nozzle on the steamer.
Insert the nozzle into position.
Rotate the accessory in clockwise direction
Align the arrow on the accessory with the double-line mark (A) on the steamer, as

Removing the Long Nozzles

Rotate the accessory counterclockwise as show in figure 2
Align the arrow on the accessory with the single-line mark on the main unit
The accessory can now be pulled out.

Installing the Short Accessories

Align the round brush or angled nozzle at the top of the steam nozzle, as show in figure 3
Push the accessory onto the extension nozzle unit it is in position
As the round brush or angled nozzle are positioned in six directions, the angle and direction can be adjusted during the installation.