FAQs
We are here to answer your common questions about Wagner products. Browse below for frequently asked questions and always reach out to us if you don’t see the answer you are looking for.
Can I use automotive paint?
Absolutely, you can use both thinned water and oil-based automotive paints. To spray lacquer material replace the cup with part #L0190A.
Read MoreCan I use automotive paint?
Absolutely, you can use both thinned water and oil-based automotive paints. This sprayer will not give you a showroom-like finish. Do not spray or clean with liquids having a flash point of less than 100ºF (38ºC)....
Read MoreCan I test my sprayer with water?
Yes, you can and you should. There is a bit of a learning curve, so testing with water first is a great way to make sure the sprayer is working properly and it’s cheaper to experiment...
Read MoreCan I leave material in the sprayer overnight?
To keep the sprayer in tip top shape we recommend cleaning the sprayer after every use. However, there may be times when you need to finish your project the next day. In that case you can...
Read MoreCan I clean the filter on my sprayer?
After each use, you should inspect the air filter in the turbine to see if it is dirty. Dust and particles may be able to be rinsed out with water. If it is excessively...
Read MoreAre other needle/tip sizes available?
Yes, there are various size tips that are available. Included with the sprayer: Available separately:
Read MoreAre other needle/tip sizes available?
Yes, there are various size tips that are available. Included with the sprayer: Available separately as a kit:
Read MoreWhere can I get parts and accessories?
Parts can be purchased through online distributors, Wagner Online or by calling us direct at 1-800-328-8251.
Read MoreCan I draw paint directly out of the paint can?
The Earlex Super Finish Max, Earlex 5700 and the FLEXiO series cannot draw from the paint can. If you have a larger project that requires you to draw out of a one or five gallon container...
Read MoreWhat should I use to clean my sprayer?
Warm, soapy water for water-based materials; mineral spirits for oil-based materials, along with a soft bristle brush and a rag. Always flush with clean water after the mineral spirits. Always check the back of the paint...
Read MoreDo I have to thin the material?
This will depend on which front end is being used. If your material will not spray at all or if it spits/splatters it may need thinning. If thinning is necessary, as little as 5% can make...
Read MoreWhy does air continuously come out when I turn my sprayer on?
The Earlex Super Finish Max, the FLEXiO series, the Earlex 5700 and the Control Series sprayers are all bleeder guns. With a bleeder gun air flows continuously; the trigger only starts and stops the paint flow.
Read More