Control Stainer 150 Sprayer
The Control Stainer 150 is a basic sprayer that speeds up projects with comfort and control. Projects such as fences, decks, furniture, and railings will get done much faster and with less work. The Control Stainer 150 provides an even and smooth finish spraying transparent to semi-transparent stains, lacquers and urethanes. It is not suggested for paints. The lightweight design and turbine power make it ideal for first-time users. Simple controls such as the adjustable material flow, pattern settings and on/off switch make for quick learning and project preparation.
- Apply stain on an 8’ x 10’ area in less than three minutes
- Lightweight and compact design for easy maneuvering around projects
- Control Finish nozzle sprays a smooth and consistent coverage
- Sprays stains, sealer and urethanes on outdoor projects
- Pattern adjustment can be horizontal, vertical and narrow round
- Adjustable paint flow to match covering speed and project size
ControlStainer150 is rated out of 5 by 1.
Rated 5 out of 5 by Pappy from Great value Just bought this from local home improvement store to paint my new rough sawn cedar fence. Builder did "good neighbor" style so every other slat is switched. Sprayer kicked out 8 foot high by 200 feet in about 4 hours, 2 coats, one with nozzle vertical, then one coat horizontal. Covered great, no over spray on neighbors, clean up was so simple, water based stain/paint, so soap and water and soft brush made it look like I just took it out of the box. Best Buy I've made for my senior retiree tool collection
Date published: 2017-07-20
how do you watch videos they have popup that say they are private
Thanks for letting us know. It's fixed now, take a look!
Date published: 2017-08-16
What is the viscosity rating of this unit in a #4 cup?
The Control Stainer is for spraying stains and other thin bodied materials like polyurethane. We don't have a suggested viscosity limit for this sprayer, but un-thinned latex paint will not spray well. For an in depth discussion contact technical support at 800-328-8251.
Date published: 2017-08-02
Can I buy an extra bowl for this?
You sure can...call customer support at 800-328-8251.
Date published: 2017-06-27
I dont understand how the material flow control knob works. Turned it counterclockwise and it came off?! Im staining rails/spindles on my deck, keeping the sprayer about 12 in away and Iconstantly have to go back with a brush to smooth drips
The flow control knob merely restricts how far you can pull the trigger. Less pull - less fluid, more pull - more fluid. When you are too far away you tend to compensate by increasing the amount of fluid. Too much fluid causes spit, overspray and the application of excess material, which runs. Keep the sprayer about 6" away and cut down on the flow of fluid. Good luck with your project. We're here to help at technical support 800-328-8251.
Date published: 2017-06-15