FAQs
We are here to answer your common questions about Wagner products. Browse below for frequently asked questions and always reach out to us if you don’t see the answer you are looking for.
What is the difference between the FLEXiO 2000/3000 and the FLEXiO 2500/3500?
The FLEXiO 2000 comes with the iSpray Nozzle, and has a 2 speed switch. The FLEXiO 2500 is an upgraded, compact, lightweight design that makes it easier to handle when spraying. It comes with the iSpray...
Read MoreWhat is the warranty on the FLEXiO series?
This Product, Manufactured by Wagner Spray Tech Corporation, is warranted to the original retail purchaser against defects in material and workmanship for one year from the date of purchase if operated in accordance with Wagner’s printed...
Read MoreWhere can I get parts for my FLEXiO series?
Parts can be purchased through online distributors, Wagner online at www.wagnerspraytech.com or by calling us direct at 1-800-328-8251.
Read MoreCan the FLEXiO series be used with 220volt?
The FLEXiO series designed for the U.S is for use on a 120 Volt circuit. If you need a sprayer for 220volt, you can find a dealer or see our 220volt Wagner version.
Read MoreCan I spray the ceiling with the FLEXiO sprayers?
Yes, you can, but never tip the sprayer upwards at more than a 45-degree angle while using the FLEXiO handheld models. If the sprayer is tipped upwards at more than a 45-degree angle material could get...
Read MoreIs the FLEXiO series recommended for indoor and outdoor use?
Yes, it is great for indoor and outdoor projects. The room or area you are spraying must be properly masked in order to prevent overspray from covering woodwork, floors or furnishings. Make sure you have masked...
Read MoreWhat should I use to clean my FLEXiO sprayer?
Warm, soapy water for water-based materials; mineral spirits for oil-based materials, along with a soft bristle brush and a rag. Always check the back of the paint container for appropriate cleaning solution. For more information on...
Read MoreDo I have to thin the material?
This will depend on which front end is being used. If your material will not spray at all or if it spits/splatters it may need thinning. If thinning is necessary, as little as 5% can make...
Read MoreWhat types of coatings can be sprayed through the FLEXiO series?
The FLEXiO series will spray water-based and oil-based coatings. Do not spray or clean with liquids having a flash point of less than 100ºF (38ºC). Flash point is the temperature at which a fluid can produce...
Read MoreWhat is the Detail finish nozzle used for?
The Detail finish nozzle is best used on your fine finish projects such as spraying cabinets, furniture, doors, trim etc. It will provide a smoother, finer finish than the iSpray Nozzle. Depending on your material, the...
Read MoreWhat is the nozzle size?
The iSpray Nozzle is 2.5mm. The Detail Finish Nozzle is 1.8mm. Nozzle sizes can not be adjusted.
Read MoreWhy does air continuously come out when I turn my sprayer on?
The Earlex Super Finish Max, the FLEXiO series, the Earlex 5700 and the Control Series sprayers are all bleeder guns. With a bleeder gun air flows continuously; the trigger only starts and stops the paint flow.
Read More