Thanks for Registering Your Control Spray QX1
Please see below for helpful content to make sure you have a great experience
How-To Videos
Troubleshooting Videos
Charts & Guides
Material Compatibility
These material are best suited for the Control Spray QX1
MATERIAL | COMPATIBILITY |
---|---|
Wood Stain | Ideal Performance |
Semi-Transparent Stain | Ideal Performance |
Solid Stain | Not Recommended |
Paint & Primer | Not Recommended |
Spray Technique
Air Cap Position for Spray Patterns
Adjust the position of the air cap on the nozzle to change the spray pattern to your desired position
Horizontal Spray Pattern
Vertical Spray Pattern
Round Spray Pattern
Spraying Techniques
Distance From Surface
Position spray gun perpendicular to and 6-8″ from the surface
Overlap Each Pass
When spraying large surfaces, overlap each pass by at least 50%.
Correct Spray Technique
Spray with smooth passes at a consistent speed. Do not flex wrist when spraying
Spray Pattern Guide
Here are some ways to troubleshoot any issues with your spray pattern if they come up
SPRAY PATTERN | IMAGE | SOLUTIONS | |||
---|---|---|---|---|---|
Clumpy Finish | Too little air and too much material. Turn up the air flow and turn down the material flow. | NOTE: This sprayer is not designed to spray thick materials. | |||
Runs & Sags | Too much air and too much material. Turn down the air flow and the material flow. | Spray gun is too close to the surface. Take a step back and hold it 6-8″ away. | Moving too slow. Move faster while remaining steady. | ||
Poor Coverage | Too little air and too little material. Turn up the air flow and turn up the material flow. | Spray gun is too far from the surface. Take a step closer and hold it 6-8″ away. | Moving too fast. Move slower while remaining steady. | If adjusting the settings does not work, try adding Wagner Paint Easy to latex paint to condition it. | |
Good Spray Pattern | Settings are adjusted properly, sprayer is 6-8″ away from the surface and is moving at a steady speed. |
Manual
Control Spray QX1 Manual
Parts & Accessories
Projects
Contact Wagner
Call & Chat Hours: Mon-Fri 8am-4:30pm CST
Support Center
Product Support
Need support for your Wagner product? We can help! Connect with us via chat, phone, email and self-help.
Manuals
Find owner’s manuals for Wagner products.
Find A Service Center
Find a service center near you for your Wagner product.