Control Pro 170 Sprayer

$ 309.99
The Wagner Control Pro 170 High Efficiency Airless™ takes the fear out of airless spraying, making it easier to paint like a pro.

The HEA system’s new tip technology decreases overspray by up to 55 percent while delivering softer spray, improving control and providing a more-consistent finish.

The durable and powerful .60 horsepower HEA pump can spray unthinned coatings with a rebuildable fluid section that maximizes sprayer life. It is backed by the industry’s best and longest warranty.

Videos

Control Pro Sprayer Overview
Control Pro Sprayer Overview Video
Control Pro Sprayer Setup
Control Pro Sprayer Setup Video

Features

  • Max operating pressure: 1500 PSI
  • Decreases overspray up to 55 percent compared to standard airless sprayers
  • Softer spray improves control for a more-consistent finish
  • Durable pump lasts up to 3x longer than competitive sprayers
  • The easy-to-replace fluid section maximizes sprayer life
  • Sureflo Pusher Valve ensures priming every time
  • 30' hose
  • Industry’s best and longest two-year warranty
0.33
Gallons/Minute
0.017"
Max. Tip Size
0.60
Horsepower
300
Gallons/Year
High Efficiency Airless Logo

Parts and Accessories

P/N 0580614
Control Pro 50' HEA Hose

Control Pro 50' HEA Hose

$59.99
Buy Now
P/N 0580601
Control Pro Spray Gun for HEA Sprayers

Control Pro Spray Gun for HEA Sprayers

$109.00
Buy Now
P/N 0580603
Control Pro 311 Tip for HEA Sprayers

Control Pro 311 Tip for HEA Sprayers

$24.99
Buy Now
P/N 0580605
Control Pro 413 Tip for HEA Sprayers

Control Pro 413 Tip for HEA Sprayers

$24.99
Buy Now
P/N 0580606
Control Pro 515 Tip for HEA Sprayers

Control Pro 515 Tip for HEA Sprayers

$24.99
Buy Now
P/N 353-311
ControlMax 311 Tip for HEA Sprayers

ControlMax 311 Tip for HEA Sprayers

$24.99
Buy Now
P/N 353-413
ControlMax 413 Tip for HEA Sprayers

ControlMax 413 Tip for HEA Sprayers

$24.99
Buy Now
P/N 353-515
ControlMax 515 Tip for HEA Sprayers

ControlMax 515 Tip for HEA Sprayers

$24.99
Buy Now
P/N 353-517
ControlMax 517 Tip for HEA Sprayers

ControlMax 517 Tip for HEA Sprayers

$24.99
Buy Now
Control Pro 170 is rated 4.4 out of 5 by 12.
Rated 5 out of 5 by from Simple Design, Intuitive Controls I bought the 170 sprayer this summer to complete cabinetry and masonry paint projects. As someone who has used the “blue brand” multiple times before, I am thrilled by the reliability and simplicity of the Wagner unit. I am thoroughly pleased with the purchase and highly recommend the 170 model for house painting projects!
Date published: 2019-06-23
Rated 2 out of 5 by from Desperately want to buy a unit for South Africa I am from Johannesburg, South Africa and have been trying to contact and purchase one of the Wagner Control Pro 170 for my small business for weeks now. I cannot find it in Africa and I cannot find it online except for the Wagner website. I have done extensive research and this product comes out tops every time. However it is extremely disappointing that I cannot get a response to my messages as I really want to buy a unit. I am hoping this review will prompt a reply with an option as to how I can buy one.
Date published: 2019-04-26
Rated 4 out of 5 by from Great Sprayer For All Projects! This sprayer is a great addition to my painting tools. I have always just hand painted and rolled almost everything. I bought a smaller paint sprayer, but was always frustrated by how little surface area I got covered before I had to refill the reservoir. It was also very heavy and hard on my wrist when I first filled it. With this paint sprayer all of those issues went out the window. It was very easy to setup initially and was super easy to get it loaded and primed and ready to spray. The first project I used it on was a bunch of doors throughout a home. In the past I had tried to spray them to only end up with runs in the paint and problems on the edges of getting them covered with paint without it being too thick. So I had resorted to painting doors by hand and that is time consuming when they are 6 panel doors with a wood grain finish. I used my new sprayer and was instantly amazed about how easy it was. It sprayed very evenly and allowed me to get paint into all of the crevices in the door without any problems. I also ended up with not a single paint run on any door I painted. Another problem with most sprayers is the cleanup. That is not the case with this sprayer. It was very easy to cleanup and make sure that everything was absolutely clean before putting it away. Overall this is a great paint sprayer and I am proud to have it as part of my painting arsenal.
Date published: 2018-09-19
Rated 5 out of 5 by from Perfect performance! What a great paint sprayer this is! I am impressed with the ease of use, clean up and all the features. Wonderful product. Can’t wait to find more projects to use it on. I painted a small rocker and it was so much nicer then using a brush. Thank you!
Date published: 2018-04-13
Rated 4 out of 5 by from Impressive sprayer delivers good results on first I recently obtained a Control Pro 170. I have years of experience using compressor driven spray guns and also own a Wagner Flexio 890 HVLP system that I’ve used hundreds of times but I had never tried a high- pressure spray unit before. This was a first for me and I was anxious to try it. The unit I received arrived by package service. The box it was packed in was stout and provided good protection during transit. Documentation The documentation provided with the unit is well written. It uses minimal words to get the points across. The included drawings are especially good. Several things could be improved however: • The manual’s safety section is fairly typical. Some warnings in the section should be repeated in other appropriate areas. (Ex. Under cleaning the unit, repeat the warning about cleaning with halogenated hydrocarbon solvents.) • Each section includes a list of items needed, but the list could be more complete. (Ex. Under cleaning outlet valve, if an item must be torqued, then a torque wrench should really be listed in the list of needed tools). • A set of picks would be convenient when servicing the inlet valve. • O-ring sizes and materials should be included in the documentation. Assembly and familiarization Out of the box, the Control Pro 170 is easy to assemble. The real good thing about the assembly is that it is mostly intuitive. The assembled unit is lightweight and easy to move around. A recommendation to all users new to the product: Take the time to read the manual and familiarize yourself with the unit and procedures. It doesn’t take long and the time spent is paid back on first use. I didn’t particularly care for the assembly of the hose to the gun. Here one must rotate the gun to attach the hose; that’s awkward. It would have been preferred to have had a swivel connection on the hose to connect to the gun. Additionally, it would have been nice to have had the hose connect at the base of the grip rather than just behind the tip. It’s more of an irritation rather than an issue. The only issue I had during assembly is that one of the tool box access doors would not lock. This isn’t a big deal but should be looked at. Wording on the PRIME/SPRAY knob can’t be easily read because knob and lettering are all the same color. It’s a minor thing only since the knob has an included pointer. This only has an affect during unit familiarization. Recommendations to manufacturer: For safety, it would be nice to place a sticker on the unit showing the depressurization procedure. The graphics as shown on page 9 of the manual are sufficient for this. First Use Prior to first use, I familiarized myself with the unit and procedures. I operated the unit using water as the spray material. Straight away, one of the first things I noticed about he unit is that it had very little vibration and it stayed where it was placed, even on prime. When the unit was in spray mode, it was very quiet. I had read a few comments regarding difficulties with priming the unit, however, in my experience, the unit primed exactly as stated in the book. No difficulties. On the first job, I sprayed a medium sized closet space with uncut drywall PVA. This included the ceiling and wall. I anticipated that cleanup could be a bit messy so working on a tarp outside of the spray area, I put the bucket of the PVA inside of a larger bucket. I then placed the unit above this. By setting up like this, I could disconnect the suction hose from the unit at the end of the job and allow it to stay in the bucket without making a mess while I moved everything to the cleanup area. Not very eloquent, but it worked. The length of hose provided is more than sufficient to handle any job either interior or exterior on my house. What I really liked is that I didn’t have to carry the paint supply with me. That can get so tiring when using a gun/cup system while working off of a ladder. While spraying, I noticed the following: • The manufacturer’s claim of significantly less overspray is absolutely true. I can easily compare the results from the Control Pro 170 to what I would expect from my other systems. • The quality of the coverage and overall job is much better than with other systems I have used. • The time to spray is greatly reduced compared to the other systems. During the job, I lost prime two times. It was not issue at all. I depressed the pusher stem a few times then switched to PRIME for a few seconds then back to SPRAY. Note: I was not able to recover prime until I depressed the pusher stem. Since I was painting the ceiling, it would have been nice to have had a tip extender. Even though these are listed in the book with part numbers, I have not been able to locate one either online or in a store that carries the Control Pro 170. The product I was spraying required a control setting no greater than 1. I was somewhat concerned because I ended up spraying more product than I had budgeted. After looking at the problem, I found several reasons for this: One reason was related to the space, another reason was related to the user (me) and a third was related to the spray unit. The unit was actually putting out more product than I had intended, even at a setting of 1. I stopped the job about half way through and found a position on the control knob midway between 0 and 1 where the unit appeared to put out less. I finished the job on this setting and used a much more reasonable volume of product. Recommendations to manufacturer: I would like to see more low flow control. For the average DIY guy, the paint projects he/she does usually don’t have the same time constraints as those of the professional. Since paint isn’t exactly cheap, having some lower flow rate options will allow the user to balance between time and economics. Cleanup No surprise here, I thought cleanup may be a bit messy, and I wasn’t disappointed. However, this was my first time actually cleaning up the system so this was to be expected. Like all systems, cleanup will get faster and easier as the user gets more experienced with it. On a positive note, cleanup was not difficult at all especially since I had sprayed a water-based product. The procedures as listed in the book work fine. Overall impression: This unit shows a lot of promise and delivers good results. I’m actually quite impressed. This particular spray unit I believe is better suited for larger jobs. Any job where walls will be painted would be that job. Painting multiple doors at one time would also be a good job. A small job such as painting a single door casing/frame would be finished in minutes and be a better candidate for a gun and cup type system. I have an upcoming job in the near future and hope to verify that I have my flow issue resolved. I am just as anxious to try the unit on this job as I was on the first job. It’s one of the few paint projects I’m looking forward to. Pending outcome of that job, I rate this unit a 4 out of 5. Well done!
Date published: 2018-03-25
Rated 4 out of 5 by from HEA airless I received an HEA airless as a test product. I have used a lot of different brand sprayers. This sprayer is very simple to use and set up. The trigger is smooth on and off. Lays paint very smooth. It is very light weight. Easy to carry and easy to move. Only drawback, there is not a swivel between the gun and hose. Overall it's a great sprayer.
Date published: 2018-03-07
Rated 5 out of 5 by from Awesome Machine This was very user friendly. Controlling the spray was easy. The flexibility to spray in any direction was outstanding.
Date published: 2018-03-07
Rated 5 out of 5 by from Great Sprayer Easy set up Easy Clean up I got the Wagner Control Pro 170 a couple weeks ago. I am staining and sealing a large privacy fence. The sprayer was very easy to set up. The instructions were very clear and concise. I did some practice spraying on some cardboard as the instructions suggested. I picked up spaying with it pretty quickly. I can't believe how well it works compared to my old sprayer. Coverage is very good and the great thing is I can spray right out of the 5 gallon bucket. Clean up was also very easy. My next project I am planning is to paint my stucco house. I am looking forward to using the Control pro on that project also.
Date published: 2018-02-24
  • y_2019, m_7, d_17, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_024964251056, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_wagnerspraytech
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 19.07ms
  • REVIEWS, PRODUCT

I am contemplating buying a Control Pro 170 or maybe 190. I plan use Valspar paint from Lowe's, which recommends a 2000 psi sprayer. Neither of these are rated at that level. Are they strong enough to handle Valspar paints?

Asked by: Old Soldier
These HEA are a lower overspray airless that operate at 1500-1600 psi. But because of the special HEA tip, it atomizes and sprays a beautiful soft pattern that is easy to overlap when spraying a large project. They are strong enough because this is a new technology. For more answers call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-07-10

What is the length of the hose ?

Asked by: Chuck7777777
Wagner Control Pro 170 comes with 30 feet of hose. Please give our technical support a call at 1-800-328-8251 if you need further assistance.
Answered by: Technical Support
Date published: 2019-06-28

Can i use water based, oil based and liqueur based paints with Wagner control pro 170? Do we thin these paints before we start painting?

Asked by: Sotha
Water based and oil based paints, stains or finishes are just fine in any Wagner spray system. No lacquer or liqueur should be sprayed. As long as the tip size matches the paint manufacturer suggestion, thinning shouldn't be necessary. For more tips call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-06-24

Will this gun head fit my force  paint crew equipment

Asked by: Crikett
The Control Pro HEA sprayer is new technology, even our old equipment doesn't fit it. For more help call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-05-20

I am going to purchase a Control Pro 170. I have a Grayco Jet Roller attachment. Will it work on the 170?

Asked by: Croe626
Non Wagner parts will not work on the Control Pro 170. It's new technology that no one can match!
Answered by: Technical Support
Date published: 2019-03-19

I need to know which sprayer is best for powder and not lequied as I need to use for aluminium “exterior”

Asked by: Mohamed
If you want to use powder and not liquid then you will want to get in touch with our industrial division, Wagner Systems. You can find their information at this link, https://www.wagnersystemsinc.com/category/products/.
Answered by: Technical Support
Date published: 2019-03-12

Will this sprayer work spaying Zinsser 293233 Dryfall Commercial and Industrial Waterborne Coating? 

Asked by: O Canada
Yes, it will work perfectly. Good luck with your project.
Answered by: Technical Support
Date published: 2018-10-30

Control Pro 170. Cleaning the suction and return tube is very time consuming. Is there a way to keep paint from building up on the tubes? Is there a tube set that features non-stick material, maybe Teflon coated?

Asked by: Toby
Yes, cleaning can be a pain sometimes. It is necessary in order to keep your sprayer working smoothly. Sorry, we do not have non-stick options for the tubes. For further help you can contact us at 800-328-8251. Thanks for your inquiry!
Answered by: Technical Support
Date published: 2018-10-18
  • y_2019, m_7, d_18, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_18
  • loc_en_US, sid_024964251056, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_wagnerspraytech
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 17.18ms
  • QUESTIONS, PRODUCT
Stay Connected

Find out what’s new from Wagner including product news, exclusive email offers, promotions and more.