Control Pro 170 Product Support

These materials are best suited for the Control Pro 170

* Smaller Tip Recommended

Here are the High Efficiency Airless (HEA) tips you should use with your sprayer for various coatings and desired pattern width

COATINGS	TIP #	PATTERN WIDTH	COMPATIBILITY
Polyurethane, Water-Based Lacquer, Transparent Stain, Semi-Transparent Stain	211	4-6″
	311	6-8″
Polyurethane, Water-Based Lacquer, Semi-Transparent Stain, Solid Stain	313	6-8″
	413	8-10″
Solid Stain, Water and Oil-Based Paint & Primer	515	10-12″	Included
Solid Stain, Water and Oil-Based Paint & Primer	517	10-12″

The 619 for thicker materials and wider spray pattern is not compatible with the Control Pro 170.

SPRAY PATTERN	SOLUTIONS
Tailing	Pressure is too low. Turn up the pressure.
Runs & Sags	Spray gun is too close to the surface. Take a step back and hold it about 10-12″ away.	Moving too slow. Move faster while remaining steady.
Overspray & Poor Coverage	Spray gun is too far from the surface. Take a step closer and hold it about 10-12″ away.	Moving too fast. Move slower while remaining steady.
Good Spray Pattern	Pressure is well balanced, spray gun is 10-12″ away from the surface and is moving at a steady speed.