Control Spray 250 Sprayer
The Control Spray 250 is a staining and finishing sprayer for small to medium sized projects. It has the power and control to cut time out of staining projects like fences, railings, furniture and trim while keeping the mess down. With simple adjustments, it can spray transparent to solid stains, lacquers and many furniture paints with speed and efficiency.
- Apply stain on an 8’ x 10’ area in less than two minutes
- Lightweight and compact design for easy maneuvering around projects
- Control Finish nozzle sprays a smooth and consistent coverage
- Sprays stains, lacquers and some paints (thinning may be required)
- Pattern adjustment can be horizontal, vertical and narrow round
- Adjustable paint flow to match covering speed and project size
Control Spray 250 is rated out of 5 by 2.
Rated 5 out of 5 by John316 from Time saver I just bought this sprayer and have used it a couple of times and it is awesome!
Date published: 2017-08-15
Rated 5 out of 5 by JeremyC from Rough-hewn rafters and deck One word...AWESOME! Perfect application...easy cleanup. This product did what the box said it would. I brushed and hand rolled my front porch...but bought this for the back porch. Finished in half the time with the same results.
Date published: 2017-05-29
It came with a little bag with some kind of grease. What is that for? I did not see it mentioned in the instructions.
Where the front end connects to the sprayer handle there is an o-ring that should be lubricated each time, after cleaning. Please make sure to read and follow all cleaning, care and maintenance procedures in the owner's manual. If you have more questions you can contact technical support at 800-328-8251.
Date published: 2017-07-26
What is the pack of Vaseline for? Inside the control spray 250 paint reservoir was a packet of Vaseline. The manual doesn't say where to apply it in the gun
The Vaseline is used on the O-ring that located at the rear of the front end when it is separated for the motor. If you go to page 10 in the manual box 4 will reference to lubricate this O-ring during the clean up process. Please call our technical support department at 1(800)328-8251 if you have any other questions or needs.
Date published: 2017-07-14
can this be used with general finishes milk paint
It sure can. You may want to thin it for better results, but no more than 10-20% with water. Spray from 6" away and adjust the gun for maximum flow with minimum spit. Spit is from having too much fluid in the air flow. Reduce the fluid flow and spit goes away. For more spraying techniques give us a call at 800-328-8251.
Date published: 2017-07-06