Both The FLEXiO 4000 and FLEXiO 4300 have a turbine that sits on the ground delivering air power to the spray gun. They both come with a 15ft air hose, the iSpray Nozzle which will spray...
Read MoreThe Control Series Sprayers are for staining and finishing small to medium sized projects and are capable of spraying low viscosity coatings. The FLEXiO Series Sprayers offer a consistent finish on a wide range of interior...
Read MoreParts can be purchased through online distributors, Wagner online at www.wagnerspraytech.com or by calling us direct at 1-800-328-8251.
Read MoreThe FLEXiO series designed for the U.S is for use on a 120 Volt circuit. If you need a sprayer for 220volt, you can find a dealer or see our 220volt Wagner version.
Read MoreYes, you can, but never tip the sprayer upwards at more than a 45-degree angle while using the FLEXiO handheld models. If the sprayer is tipped upwards at more than a 45-degree angle material could get...
Read MoreYes, it is great for indoor and outdoor projects. The room or area you are spraying must be properly masked in order to prevent overspray from covering woodwork, floors or furnishings. Make sure you have masked...
Read MoreWarm, soapy water for water-based materials; mineral spirits for oil-based materials, along with a soft bristle brush and a rag. Always check the back of the paint container for appropriate cleaning solution. For more information on...
Read MoreThis will depend on which front end is being used. If your material will not spray at all or if it spits/splatters it may need thinning. If thinning is necessary, as little as 5% can make...
Read MoreThe FLEXiO series will spray water-based and oil-based coatings. Do not spray or clean with liquids having a flash point of less than 100ºF (38ºC). Flash point is the temperature at which a fluid can produce...
Read MoreThe FLEXiO series, the Earlex 3700 & 5700 and the Control Series sprayers are all bleeder guns. With a bleeder gun air flows continuously; the trigger only starts and stops the paint flow.
Read MoreAirless Sprayers atomize coatings by forcing the product through a small tip opening at very high fluid pressure. The fluid pressures are commonly between 1200-3300psi, or higher. Airless sprayers are capable of spraying larger surfaces at...
Read More