Control Spray Max Sprayer
The Control Spray Max sprays materials in patterns from 1/2" to 12" wide with optimum control and precision making it superior to brushes and spray cans for fine finish work. HVLP technology uses a high volume of air at low pressure to atomize materials into fine particles. This results in a professional finish with virtually no overspray.
- Stationary base with variable power settings
- Control Finish nozzle with 1 ½ qt. cup and professional grade metal 1 qt. cup
- Pattern adjustment can be horizontal or vertical and wide or narrow
- Adjustable paint flow to match covering speed and project size
- Adjustable for full coverage, precise control and low overspray
Parts and Accessories
is there a tip to spray ceilings?
There is no special "ceiling" tip, just tilt the gun to 60 degrees backwards and spray the ceiling! Good luck with your projects!
Date published: 2017-11-28
Can this gun be used for spraying lacquer. I have a furniture refinishing business. I was using a Wagner CS2000, Is that product still available?
The Control Spray Max can be used with water base lacquer. It cannot be used with anything that has or cleans up with a flashpoint of less than a 100 degrees. The CS2000 is no longer available but we do have a contractor line of HVLP sprayers that will work for your furniture business. You can find more information at this link, https://www.titantool.com/products/fine-finish-sprayers/capspraytm-series-hvlp/. You can also call them at 1-800-526-5362.
Date published: 2017-11-26
Where can I buy the control max hlvp in store
Home Depot is the answer. If they don't have one in stock, they will order one in for you. Contact us to discuss other options at 800-328-8251.
Date published: 2017-11-10
what is the power in PSI
The Control Spray Max has a PSI rating of 2.6 at the nozzle. If you have other questions or needs feel free to contact our technical support staff at 1(800)328-8251.
Date published: 2017-09-23
what is the nozzle size in mm?
The nozzle/needle size for the Control Spray Max nozzle is 1.8mm. Please contact our technical support staff at 1(800)328-8251 if you have any other questions or needs.
Date published: 2017-09-23
I am painting a small project using an interior latex paint. I am getting a lot of spatter, and have tried different pressures as well as different dilutions. What can I do to fix this?
You may need to thin the paint just a bit and try again. After you thin it make sure it is mixed up very well with a drill. Also make sure the end of the nozzle is no more than 8" away from what you are spraying. If you still have any problems feel free to call us at 1-800-328-8251.
Date published: 2017-09-20
I asked the question about Valspar Reserve exterior latex paint a few moments ago, because a friend has loaned me her paint sprayer, a Control Max. But I won't use it if the paint has to be thinned, so I need to know. Thanks!
I am having difficulty using a diluted latex myself. I wouldn't recommend trying it full thickness.
Date published: 2017-10-27
will the wagner control spray max work with solvent based lacquer finishes and/or precatalyzed lacquers
Our Wagner sprayers are designed to spray materials that clean up with either mineral spirits(oil-based) or warm soapy water(water-based). The components of the sprayers will not hold up against the solvent-based materials. Please contact our technical support staff at 1(800)328-8251 if you have any other questions or needs.
Date published: 2017-09-16