Product: Earlex 5700 Stationary HVLP Spray System

Can you paint the ceiling with the Earlex 5700?

Yes.

Read More

Can the Earlex sprayer be used with 220 Volt?

The Earlex 3700 and Earlex 5700 sprayer is equipped with a 15 Amp minimum circuit and is designed to be used with 120 Volt, 60HZ current.

Read More

Can I use this sprayer to spray a car?

Yes, you can use both thinned, water and oil-based automotive paints.  This sprayer will not give you a showroom-like finish.

Read More

Can I use automotive paint?

Absolutely, you can use both thinned water and oil-based automotive paints. To spray lacquer material replace the cup with part #L0190A.

Read More

Can I leave material in the sprayer overnight?

To keep the sprayer in tip top shape we recommend cleaning the sprayer after every use. However, there may be times when you need to finish your project the next day.  In that case you can...

Read More

Can I clean the filter on my sprayer?

After each use, you should inspect the air filter in the turbine to see if it is dirty.   Dust and particles may be able to be rinsed out with water.   If it is excessively...

Read More

Are other needle/tip sizes available?

Yes, there are various size tips that are available.   Included with the sprayer: Available separately:

Read More

Where can I get parts and accessories?

Parts can be purchased through online distributors, Wagner Online or by calling us direct at 1-800-328-8251.

Read More

Can I draw paint directly out of the paint can?

The Earlex 3700, Earlex 5700 and the FLEXiO series cannot draw from the paint can.  If you have a larger project that requires you to draw out of a one or five gallon container then you...

Read More

What should I use to clean my sprayer?

Warm, soapy water for water-based materials; mineral spirits for oil-based materials, along with a soft bristle brush and a rag.  Always flush with clean water after the mineral spirits. Always check the back of the paint...

Read More

Do I have to thin the material?

This will depend on which front end is being used. If your material will not spray at all or if it spits/splatters it may need thinning. If thinning is necessary, as little as 5% can make...

Read More