Product: Control Stainer 150 Sprayer

The Control Series Sprayers are for staining and finishing small to medium sized projects and are capable of spraying low viscosity coatings. The FLEXiO Series Sprayers offer a consistent finish on a wide range of interior...

Can I spray paint with the Control Series?

Some Control Spray units are able to spray some thinned latex paints. They are: Paint & Primer in One and primer are not recommended to be used in the Control Series.

Can I spray oil base products?

The Control series will spray both water and oil-based coatings. Do not spray or clean with liquids having a flash point of less than 100ºF (38ºC). Flash point is the temperature at which a fluid can...

What should I use to clean my sprayer?

Warm, soapy water for water-based materials; mineral spirits for oil-based materials, along with a soft bristle brush and a rag. Always flush with clean water after the mineral spirits. Always check the back of the paint...

Where can I get parts for my Control Series?

Parts can be purchased through online distributors, Wagner Online at www.wagnerspraytech.com or by calling us directly at 1-800-328-8251.

What is the difference between an airless sprayer and an HVLP sprayer?

Airless Sprayers atomize coatings by forcing the product through a small tip opening at very high fluid pressure. The fluid pressures are commonly between 1200-3300psi, or higher. Airless sprayers are capable of spraying larger surfaces at...