Product: Control Pro 190 Sprayer - Cart

Inner Feed Roller

$79.99

How do I know what size spray tip to use?

The tip size is determined by the coating manufacturer. It may be found in the application section listed on the label of the can or bucket of material. If it is not listed on the can...

Can the HEA sprayer be used with 220volt?

The HEA series is designed for use with 120volt 60hz current. If you need a sprayer internationally you can find a dealer at this link, https://www.wagner-group.com/en/consumer/service/service-for-consumers/servicenumbers-international/.

Can I use the HEA sprayer to paint my car?

The HEA sprayers are designed for large interior and exterior surfaces like walls, siding, fences, decks and other projects around the home. Therefore, they do not provide an automotive showroom quality finish.

Can I use a generator with the HEA sprayers?

Yes, you can. The Control Pro 130 uses a 2,500 Watt generator but you must disable the idle-down feature. The Control Pro 150/170/190 uses a 5,000 Watt generator but you must disable the idle-down feature.

Do I need to thin the material?

Transparent and semi-transparent stains should not need to be thinned. If thinning is necessary, as little as 5% can make a big difference. Use water for water-based materials and mineral spirits for oil-based materials. Never exceed...

What types of coatings can be sprayed through the HEA sprayers?

The HEA sprayers will spray water-based and oil-based coatings. Do not spray or clean with liquids having a flash point of less than 100ºF (38ºC). Flash point is the temperature at which a fluid can produce...