PaintReady Station Sprayer

$ 149.99
The PaintREADY Station paints a wall seven times faster than a brush with less effort.

The turbine base delivers air power through the hose to spray unthinned paint and sits on the ground to reduce user fatigue.

The PaintREADY Station is ideal for interior projects like walls as well as exterior decks and sheds. Separate the nozzle and gun assembly for cleanup faster than a brush or roller.

Videos

Tips & Tricks – Best Paint Finish
Tips & Tricks – Best Paint Finish Video
Tips & Troubleshooting – Spraying Technique
Tips & Troubleshooting – Spraying Technique Video

Features

  • Sprays up to 15 ounces per minute
  • iSpray Technology provide consistent coverage and a light texture finish
  • Stationary base with 15' hose for less fatigue and wide working reach
  • Sprays un-thinned paints including paint and primer-in-one products
  • Pattern adjustment can be horizontal or vertical and wide or narrow
  • Adjustable paint flow to match covering speed and project size

Parts and Accessories

P/N 0529224
Air Cap for iSpray Front End (Black Needle)

Air Cap for iSpray Front End (Black Needle)

$7.99
Buy Now
P/N 0529225
Spray Jet Kit for iSpray Front End

Spray Jet Kit for iSpray Front End

$8.99
Buy Now
P/N 2343747
Nozzle for iSpray Front End (Black Needle)

Nozzle for iSpray Front End (Black Needle)

$4.99
Buy Now
P/N 0529005
Check Valve Kit for iSpray, Control Finish and Detail Front Ends

Check Valve Kit for iSpray, Control Finish and Detail Front Ends

$5.99
Buy Now
P/N 0417465
Nozzle Gasket for iSpray Front End (Black Needle)

Nozzle Gasket for iSpray Front End (Black Needle)

$4.99
Buy Now
P/N 2303366
1.5 Quart Cup for iSpray Front End

1.5 Quart Cup for iSpray Front End

$9.99
Buy Now
P/N 0529013
Detail Finish Front End

Detail Finish Front End

$39.99
Buy Now
PaintREADYStation is rated 2.9 out of 5 by 11.
Rated 3 out of 5 by from Worked out well in the end Bought this from Lowes in July to pre-paint 90 T&G pine boards for a soffit replacement projects. I figured this would work well as I could control the set up for painting in my garage. The primer sprayed well and cleanup took only a few minutes. Despite the notion that this can spray latex paint "out of the can" my experience showed that putting even quarter cup of water into the can significantly improves the sprayability. I get the sense that paint makers are happy to have thick and drip free paint as it goes on as a thicker coat and gives less mess. This would seem to be the opposite of what we need for spraying, which is a free flowing paint. After that lesson, thinning the top coat made application a breeze. Seems it needs high volume settings for flow and high speed air to make it work well. Probably other lower viscosity paints could run on lower settings. Why does the parts list online mention "black needle" when my unit has a white one? Why can I not see the appropriate parts online. The fact you sell them suggests that they are replacement items that would be needed in the future.
Date published: 2020-09-10
Rated 3 out of 5 by from It’s just OK Bought it last weekend and used it to paint my interior doors. When I sprayed the paint, it was really splotchy. Overall, the coverage was great, fast and easy.
Date published: 2020-07-09
Rated 1 out of 5 by from Will give you as much use as a ziploc bag I'm in the process of painting my kitchen cabinets and this is the first time using my Wagner Paint Ready Station. The unit took a bit of getting used to but after some practice and conversation with a Wagner rep about what paint to use, I got a pretty good feel for it. Used 2 times with thinned Zinsser 123 primer without a problem. Unit stopped working once I was ready to apply the color and I realized the filters needed to be replaced. Why only include one filter in the package if it will need to be replaced after every couple uses? After searching 3 local home improvement stores, Amazon, and Walmart, finally called Wagner for the replacement part. At $2.20 a piece I ordered 5 filters since I would have to pay $5 for shipping. Oh, it should've been $9.50 for shipping but the rep, Julie, was doing me a "favor" probably because she was unnecessarily rude when she answered the phone. Waited a week for the filters to come in, only to realize it had been sent to the wrong address. You got me Julie. Anyways - replaced the air filter and then used 2 times with SW Emerald Urethane without a problem. Now I am on my final coat of painting and this thing WILL NOT SPRAY. I have been diligent about cleaning every part of this unit after every use. I have checked for leaks that would cause loss of pressure, changed the settings, changed the air filter and thinned the paint (mind you I did not have to before). It will not spray when held at the proper angle but somehow will spray upside down? How? Don't waste your money with this. It will cause more of a headache than it's worth.
Date published: 2020-05-07
Rated 3 out of 5 by from Liked it, BUT.... Bought this to do ceilings that were being retextured. I have a lot of experience with airless sprayers, having sprayed numerous exteriors and interiors of newly built homes. The overspray inside is toxic. So, I decided to purchase a Wagner PaintReady Station HVLP sprayer for my ceiling project. It took a big of getting use to as the material does not come out as strong or fast as an airless. Glad I needed to shoot primer first. The result was pretty good, but did have some clogging issues. First, I simply brushed dried paint away from the tip and that worked for awhile, but then I needed to break down the tip and brush it out good. I also tried it with some heavy exterior latex and the sprayer just didn't have enough umph to push it through. I definitely recommend wearing a mask while painting -- at leas indoors. Also, I found you cannot leave it too long without spraying as things clog up and require breakdown and scrubbing. Finally, Wagner does not list the PaintREADY Station on their web site. You have to search for it. I suspect it has been replaced by another model.
Date published: 2019-11-15
Rated 4 out of 5 by from Use to paint a basement ceiling I used the paint ready station to paint a basement ceiling. It was quick, and cleanup was a snap. Had some issues getting the spray dialed in at first using a gallon a lot sooner than i had expected. Overall, once I got the hang of using the machine and the nozzle settings, the job went super quick, and the results are fantastic.
Date published: 2019-08-20
Rated 2 out of 5 by from Stop Working!!! I bought this in November 2018 used it for a week, cleaned it, put it away went to go use it again last week and the unit will not power on at all.
Date published: 2019-06-07
Rated 1 out of 5 by from didn't work After numerous attempts, and much wasted time, I returned this device to Lowe's, where I was told by a salesperson that "it's a waste of money". It easily clogged and was only able to "spit" paint, until it didn't work at all.
Date published: 2018-11-05
Rated 5 out of 5 by from Wonderful paint system I bought the paint ready station last spring to paint my neighbors house. I had just landscaped her entire front and back yard and she was impressed with my keen eye for detail so she asked me to paint her house. After learning the parts of the sprayer, practicing on plywood and scrap pieces of Wood i realized just how easy it is to use. It does excellent narrow or detailed areas as well as the wide pattern covers exceptionally well. As I began to paint the soffit areas i was pleased how quickly and evenly it sprayed the first coat. No runs of drips. As I began the gable ends and the sides of the house again I am pleased at its even application without any runs or drips. I had a person standing by to backroll but it wasn't necessary. Lol had to send them home. The area of coverage i was able to cover with each tank full of paint was impressive. It was really warm out and though I was in the shade the paint was drying quickly. I was worried the passes i made with the overlap would be uneven or noticeable, but the entire house dried evenly and is beautiful. This was my first house I've painted with a sprayer and it came out so nice i have been painting literally every one of my neighbors houses since then and still going strong. To date i have painted 46 houses and have a waiting list of over two months of clients waiting for me. The clean up of the sprayer is so quick and easy. My hats off to the Wagner corp. Excellent product.
Date published: 2018-06-04
  • y_2020, m_9, d_30, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_024964215171, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_wagnerspraytech
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 115.03ms
  • REVIEWS, PRODUCT

Can unit be tilted to print ceiling Or is an attachment needed?

Asked by: Da painter
You can paint ceilings with this sprayer. We do not recommend that you turn it completely upright though as paint could get on your face or in your eyes. Feel free to call us at 1-800-328-8251 if you have any further questions.
Answered by: Technical Support
Date published: 2019-07-22

Can I use the Wagner paint ready station for textured paint for cement? Do I need to thin it out?

Asked by: Bdccweb
Any texture in your paint can prematurely wear the nozzle/needle on your Paint Ready. This is a replaceable part. Thinning slightly will help, but it's the size of the particle that will make the difference if it clogs or not. For help with replacement parts, call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2020-01-11

trigger is always on so spray is continuis

Asked by: James51
Air is always on but paint only flows when the trigger is pulled. Unless, the nozzle ring is loose and allowing the nozzle to move away from the gun, or the air cap or nozzle has a crack or break in it allowing paint to push past the seal. For help with this call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-07-08

What is the PSI for the air pressure for the each high and low air levels for the PaintREADY Station?

Asked by: deet306
The Paint Ready operates at a maximum of 2psi.
Answered by: Technical Support
Date published: 2019-06-28

Shall we use this for spraying polyurethane lacks for furnitures

Asked by: Ayyappan
Sure you can spray polyurethane with the Paint Ready. However, the iSpray nozzle is great for the fence, wall or deck. For painting your trim, cabinetry or furniture projects add the Detail Finish nozzle, part #529013 for finer atomization and a better looking end result. Good luck with your project. For more tips, call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-06-18

Will you be able to run Rustoleum when mixed 50/50 with mineral spirits?

Asked by: Anonymous
Sure you can spray thinned Rustoleum paint with the Paint Ready. However, the iSpray nozzle is great for the fence, wall or deck. For painting your trim, cabinetry or metal projects add the Detail Finish nozzle, part #529013 for finer atomization and a better looking end result. Good luck with your project. For more tips, call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-06-18

Can you use stain with this paint sprayet

Asked by: Autigers0483
Yes, water or oil based paints, stains or finishes are fine. For more tips call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-06-17

My question is about the Material flow Knob down on the trigger. I need to know with the knob screwed all way in. Is that the Highest or Lowest setting. it was a used item when i bought it.

Asked by: inmac27
The material control knob actually controls how far you can pull the trigger. With it screwed in you have the most pull so the most fluid flow, with it screwed out you have less trigger pull, so less fluid flow. For more tips call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-06-14

I have a HVLP paintready sprayer and I use it to paint many murals a year, my hose just broke on it, and I was wondering how I can order a replacement hose?

Asked by: JordanS
Give us a call for warranty service or parts at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-06-14

Is this model # 2338340? 

Asked by: Paintqueen
Yes it is.
Answered by: Technical Support
Date published: 2019-05-22

Will the paint ready work with Acrylic Deck Over Behr Premium paint

Asked by: keith
DeckOver paint cannot be sprayed with consumer level sprayers. It is better to roll for the best coverage.
Answered by: Technical Support
Date published: 2019-04-10

With this sprayer work with 100% acrylic paints

Asked by: Grizz
Yes it will work with acrylic paint.
Answered by: Technical Support
Date published: 2019-04-01

Can I use bed liner in the Wagner PaintREADY station?

Asked by: MikeO
We do not recommend the PaintReady Station for bedliner material. We do recommend the MotoCoat sprayer because it has a longer hose and a spark contained motor. You can find more information and watch some video's at this link, https://www.wagnerspraytech.com/products/paint-sprayers/motocoat-complete-auto-paint-sprayer/. If you would like to discuss this you can call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2018-12-25

I'm considering buying this product to paint a wrought iron fence. I would be using oil base paint, would it be a good choice?

Asked by: David53
You would be better served by this - https://www.wagnerspraytech.com/products/paint-sprayers/flexio-690-paint-sprayer-reconditioned/ Because it comes with the detail finish sprayer that we think will work better for your wrought iron fence project.
Answered by: Technical Support
Date published: 2018-10-19

Can I use this system for finishing stained wood (eg with varnish)? Thanks.

Asked by: vio1
The Paint Ready can spray finishes and paints that are oil or water based. We also make a line of HVLP sprayers specifically for wood finishing called Earlex, see them at www.rockler.com or call us for more info at 800-328-8251.
Answered by: Technical Support
Date published: 2018-09-19

Is there a hose extension for this item 

Asked by: Hank V3
There is not a hose extension for any of our HVLP systems. The air hose length has been designed for the proper output of the turbine.
Answered by: Technical Support
Date published: 2018-09-11

My sprayer is spraying continuously without depressing the trigger. What do I do?

Asked by: Sky S
Tighten the retaining ring on the front of the sprayer. When it's loose, the nozzle moves away from the needle, breaking the seal. For more help call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-08-22

Can I buy spartly High-flex air Hose for PaintRead station Model 2338340

Asked by: Malik
The only hose for the Paint Ready is part #0414219. We have them in stock, just give us a call to place an order at 800-328-8251.
Answered by: Technical Support
Date published: 2018-09-14

Can this be used with oil based/water based stains,or other finish materials,o small projects

Asked by: tserio
Most water based or oil based materials can be sprayed with the Paint Ready sprayer. For more help call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-09-14

Cup does not seem to get pressure to move paint up the tube although the cup is on as tight as reasonably possible. Doesn't even move water. Any ideas?

Asked by: Crystalyne
Make sure the air vent on the suction tube is clear. It is the tiny hole in the side of the tube just under the gasket. Also make sure the check valve is clear and allowing air into the cup. Give us a call with any further questions at 800-328-8251, thanks for contacting Wagner!
Answered by: Technical Support
Date published: 2018-09-14

does it spray latex?

Asked by: Luna Tsee
It will spray most latex paints, however, some paint may require thinning. For more help call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-05-16

used it today first time . question is seems like i have a lot of drift spray and it was a calm day . and it seemed to go through a lot of paint quick . iknow i still learning

Asked by: dodgeram
Spray from 6-10" away from the project. Cut down on the paint flow to eliminate overspray/spitting and more will land on the project! For more tips and tricks call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-09-18

I purchased the paint ready station several years ago and when painting it doesn’t seem to be the fine spray that get with my more expensive airless sprayer.  Tends to come out very heavy.  I do not have the white sprayer for unthinned paint.  Suggestions

Asked by: Cfhoward4
With the Paint Ready and latex paint, we suggest thinning about 10% with water and adding a flow agent can also help. Adjust the gun so that it does not spit (heavy droplets) and when spraying from 6" away, control the amount you apply by the speed you move. Apply a wet coat with each pass and overlap 50%. For more tips call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-09-18

I have damaged my hose. My unit isn't covered by warranty any longer. Can I order a hose?

Asked by: Angie
You sure can get a new hose, give us a call to place an order at 800-328-8251.
Answered by: Technical Support
Date published: 2018-09-14

What is the difference between the Wagner paint ready 0529017 and the Wagner paint ready 529002?

Asked by: Katy
The Paint Ready Station comes with the iSpray front end for general purpose painting. The Paint Ready System comes with the iSpray and the detail front end for fine finishing, such as trim or cabinets. For more info call us at 800-328-8251.
Answered by: Wagner
Date published: 2018-03-30

I just bought this model sprayer and am having a hard time controlling the amount of over-spray. I'm beginning to think that I bought the wrong model. I'd like to speak to someone or get some help...I want this to work.

Asked by: Amanda1
The PaintReady Station is a HVLP(High Volume Low Pressure) sprayers, which is designed to deliver minimal overspray compared to traditional airless units. There are a few factors that help mitigate/control the overspray. First, you want to make sure that you have the gun about 6-8 in from the project itself. Too far away will result in more overspray since it wont be able to reach the project, Too close can cause the material to run. Second, there are two setting that can be adjusted to alter the spray of the material: the power and material flow control. Thicker materials will require higher power to fully atomize the material but just because it is spraying at full power does not mean you want to stay at full power. Similarly, the material flow control will need to be set higher for the thicker material to flow correctly. But once again just because it works at the maximum setting doesn't mean you want to be set there. You want to find the happy medium, so adjusting these setting down until the unit starts to spit and then go back up to the previous setting where it did work. This will get the sprayer set to deliver maximum efficiency at minimal effort. If your concerns still persists you may also contact our technical support staff directly at 1(800)328-8251 and they can troubleshoot with you to see about getting your sprayer working well for you.
Answered by: Wagner
Date published: 2017-10-04

I'm using this for the first time with a latex for painting cabinets and doors. I'm getting a lot of splatter. I have it set to 2, lessoned the material volume knob and cleaned the nozzle. Better, but not good enough. Suggestions?

Asked by: Splatter
The PaintReady Station comes with the Ispray Front End that is designed to produce a roller like finish. If you are wanting a smooth finish you would want to purchase the Detail Finish Front End. The part number for this front end is 0529013 and it can be purchased via online or you can call our technical support team directly at 1(800)328-8251. You may also contact this team if you have any other questions or needs.
Answered by: Wagner
Date published: 2018-02-15

Are any of the Wagner backpack kits compatible with this unit? 

Asked by: BigTX
There is no backpack available for the PaintREADY Station. Since it is an HVLP sprayer the cup is pressurized which pushes paint up the "suction" tube, it doesn't actually draw material up the tube. If you need to draw out of a larger container you may want to look at our Flexio 970 or 990 at this link, https://www.wagnerspraytech.com/products/paint-sprayers/flexio-series/. Please feel free to call us at 1-800-328-8251 if you have any further questions.
Answered by: Wagner
Date published: 2017-11-20

Would you recommend this for painting the exterior of a house?

Asked by: Polo10
We have many sprayers that would work well for the outside of a house. This would work well and very controllable, but would be slow. Something like our Flexio 970 would draw paint from the can and get the job done quicker! Call technical support at 800-328-8251 for more info.
Answered by: Wagner
Date published: 2017-08-15

Can I order a split gun?

Asked by: Chiefdave3
Please contact us at technical support to discuss this so called "split" gun - 800-328-8251. We just don't know what you're asking about.
Answered by: Wagner
Date published: 2017-08-07
  • y_2020, m_9, d_30, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_44
  • loc_en_US, sid_024964215171, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_wagnerspraytech
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 146.47ms
  • QUESTIONS, PRODUCT
Stay Connected

Find out what’s new from Wagner including product news, exclusive email offers, promotions and more.