Flexio 890 Sprayer

$ 214.99
The FLEXiO® 890 stationary painting system puts the weight in the integrated storage case on the ground for extended spraying comfort. It can paint a wall 12 times faster than a brush or put a fine finish on furniture saving time and effort.

The FLEXiO 890 paint sprayer comes complete with two nozzles, one for big surface projects like walls and ceilings and the other for small projects and fine finishing on furniture, cabinets and trim. The turbine sits on the ground delivering air power through the hose to spray unthinned coatings with on-handle adjustments to maximize coverage and minimize overspray.

Cleaning is faster than a brush or roller with a few removable parts that rinse clean, and the turbine base holds the hose and nozzles for easy storage.

Covers an 8’x10’ surface in minutes:
-Stain: 1 minute
-Latex: 5 minutes

Videos

FLEXiO 890 Setup
FLEXiO 890 Setup Video
FLEXiO 890 Spraying
FLEXiO 890 Spraying Video

Features

  • Covers an 8’ x 10’ surface in one to five minutes and can spray up to 8.4 gallons per hour
  • X-Boost Base with 11 ½' air hose provides longer painting comfort
  • Innovative iSpray nozzle provides fast coverage and can spray unthinned paints
  • Pattern adjustment can be horizontal or vertical and wide or narrow
  • Detail finish nozzle for small projects and fine finishes
  • Adjustable paint flow to match covering speed and project size

Parts and Accessories

P/N 0529224
Air Cap for iSpray Front End (Black Needle)

Air Cap for iSpray Front End (Black Needle)

$7.99
Buy Now
P/N 2343747
Nozzle for iSpray Front End (Black Needle)

Nozzle for iSpray Front End (Black Needle)

$4.99
Buy Now
P/N 0529005
Check Valve Kit for iSpray, Control Finish and Detail Front Ends

Check Valve Kit for iSpray, Control Finish and Detail Front Ends

$5.99
Buy Now
P/N 0417465
Nozzle Gasket for iSpray Front End (Black Needle)

Nozzle Gasket for iSpray Front End (Black Needle)

$4.99
Buy Now
P/N 2303366
1.5 Quart Cup for iSpray Front End

1.5 Quart Cup for iSpray Front End

$9.99
Buy Now
P/N 0529013
Detail Finish Front End

Detail Finish Front End

$39.99
Buy Now
Flexio 890 Sprayer is rated 4.2 out of 5 by 27.
Rated 4 out of 5 by from Great product, but parts! Great product, I have used it on over 10 kitchen! I need a new hose since my "pistolgrip" are damaged and leaks air, do I have to buy a new kit?
Date published: 2020-07-19
Rated 1 out of 5 by from Motor burnt out first use We brought the Wagner Flexio 890 after extensive review and it looked to be the right product for the job we had: painting a work shop walls and roof. Unfortunately a quarter of the way through the job there was a change in the engine noise and then a burning smell. Left high and dry. Very very disappointed.
Date published: 2020-04-12
Rated 5 out of 5 by from Once you get the dilution right, this is a dream Bought this for a decorating project - a room with hundreds of different angles and calls, couldn't face all the cutting in that would be needed for a roller. I'm based in the UK, and our paint is a lot thicker, it seems, I had a lot of splatter to start, but Han in the support team talked me through settings and dilutions - I had to dilute the durable matt emulsion by about 35 percent in the end, but when I finally got it right, it worked like a charm, did 3 coats in two days, and the finish is perfect.
Date published: 2019-06-14
Rated 5 out of 5 by from Very valuable tool I purchased this to paint some 100 year old doors that had so many brush strokes from previous applications that the doors looked terrible. I sanded the old finish smooth with 120 grit sandpaper and then cleaned with a damp cloth. I sprayed the doors with a semi-gloss latex paint and was absolutely stunned by what I accomplished in about 10 minutes. I did apply a second coat but the doors looked almost new and yet all the original hardware still fit and so we can tell they are old doors. I have since used the tool to paint kitchen cabinets and furniture. You will not be disappointed. Clean up takes a little longer than they say it will but I found that starting with a clean tool means cleaning up properly when done. Don't shortcut the process. I have used the product for over one year without any issues.
Date published: 2018-05-20
Rated 1 out of 5 by from Great product if lasts enough to finish the projec Easy to use, and easy to clean. I am very disappointed as unit stopped and never worked again when I moved to backyard to continue the fence job. This was my second time using it and unfortunately passed the warranty period.
Date published: 2018-05-17
Rated 5 out of 5 by from Great homeowner's tool! Opened it up, set it to recommended settings for my latex primer/paint, and had fun painting my house. All four times it misbehaved were user error. The first was severe drooling and glob-spitting because I didn't realize the black keeper ring came a bit loose when I changed my spray pattern. That ring needs to stay as tight as it goes; I don't think you can overtighten it by hand. Second time, I failed to unscrew the container before taking off the black keeper ring, and air pressure made it barf paint. Third time was glob-spitting, and I was stumped for a while; I thought I had done everything by the book. Figured out the teeny air valve had water in it from the last washing; when dried, worked perfectly again. Fourth time, same spitting, but because the little air hole in the top of the suction tube got paint on it-- I had knocked over the sprayer's container after adding paint. I detail those because the short trouble-shooting section in the booklet didn't give the last two as "how to fix" options. Some reviews said they took the nozzle apart and soaked it if they took a break, but you don't need to. The air channel and paint channel are separate, so leave the nozzle all together and the paint won't dry anywhere but the exposed tip of the nozzle, which is super easy to wipe clean even when the paint is dry on it; the plastic resists paint cling. My one gripe is mild: so that the larger material container can hold as much as it does, it has a rim angle that means it has to be turned absolutely upside-down when pouring paint out. There was always at least a quarter inch left in the bottom that the suction tube couldn't get. I am a female with size 8 hands and can barely hold the bottom of the material container with one hand, so the whole paint-retrieval process is slightly annoying. As for cleaning, I tried the recommended process of spraying water through before taking apart the nozzle, but prefered to just take it to the sink instead; the latex paint needs more than a rinse to come off because it's so thick. I carried this rig in pieces up and down a two-story scaffold many times, slightly awkward but very doable. The reach of the hose isn't great if you're using this on a ladder, but any longer and it would get annoying to deal with; it is fairly stiff. I appreciated that I could turn the compressor on and off from the hand unit. The switch is on both sides of the handle, so it's easy to toggle no matter which hand it's in. The compressor's just quiet enough that I didn't need hearing protection (outdoors), and I am sound sensitive. I'm glad I went for a model with the separate, ground-based turbine, and glad it has its own handled case. And yes, the spray gun holder on that handle is helpful, especially if you are working on uneven ground where the hand unit would fall over by itself. Thank you, Wagner people, for making this handy little machine!
Date published: 2017-11-04
Rated 2 out of 5 by from Loss of power I have had this gun for less than a year and now it wont power up. I flip the switch and nothing happens.
Date published: 2017-06-26
Rated 5 out of 5 by from Ease of use makes this a must have for all DIYers My husband and I own a small boutique that specializes in Repurposing old furniture. I bought my Flexio 890 last summer and since that time have used it to paint over 250 pieces of furniture. Prior to that I was painting all of our pieces with a brush. This product has been a lifesaver and a huge Timesaver. It also gives an incredibly perfect finish to our pieces that could not be achieved with a brush. The biggest compliment from our clientele is that the pieces we do have such a perfect finish...no brushstrokes...no drips. I was a bit reluctant at first, to use the sprayer thinking there would be paint everywhere. The paint gets on the piece but there is almost no overspray. I was also concerned that after a few uses, it would clog up and that the clean up would take more time than painting with a sprayer would be worth. Not true. The cleanup is very easy and after 250 pieces, it still works perfect every time. I use mine almost everyday and I don't know now how I ever lived without it. No classes required. Fill it with paint and get to work. Your first piece will look like it was painted by a pro.
Date published: 2017-05-07
  • y_2020, m_9, d_30, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_US, sid_024964218806, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_wagnerspraytech
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 91.97ms
  • REVIEWS, PRODUCT

Hi, I was wondering if this product can be use on automotive paint and clear coat? I'm won't be using plastic dip paint.

Asked by: WTPHO
Yes, you can use the Flexio 890 with automotive enamel paints, not lacquer. For help choosing the right sprayer for your projects, call us first at 1-800-328-8251.
Answered by: Technical Support
Date published: 2020-04-09

CAN you spray paint tremclad paint with it ?

Asked by: Christian
Most water and oil based paints, stains and finishes are just fine in Wagner sprayers. Make sure of the cleanup first. Depending on the project and which front end you use you may need to thin the coating. Feel free to call us at 1-800-328-8251 if you have further questions.
Answered by: Technical Support
Date published: 2020-02-17

What is the difference between the Flexio 890 and the Flexio 5000

Asked by: Jamie46
The main difference between the fFlexio 890 and Flexio 5000 is the design of the iSpray front end. The new nozzle designed iSpray front end come with the Flexio 5000 will provide paint control with a uniform and contained pattern. Also, the new paint flow dial is numbered for precise and easy setting for the range of coatings the Flexio can spray and easy clean up. Please give our technical support a call at 1-800-328-8251 if you need further assistance.
Answered by: Technical Support
Date published: 2020-05-09

Where does it get it'e power? what is the power source?

Asked by: Robbo
All Wagner tools are fitted with electrical cords to plug into any 110 V outlet. Call us with your questions at 1-800-328-8251. Good luck with your projects.
Answered by: Technical Support
Date published: 2019-10-30

Do you sell the tube and plate that sits in the paint container the tube the sucks up the paint into the gun. 

Asked by: Silverazor22
Yes, the suction tube and and the phone gasket are available for purchase separately. To place an order give us a call at 800-328-8251. Thanks for contacting Wagner, have a great day!
Answered by: Technical Support
Date published: 2019-08-21

I plan to use this with Benjamin Moore Advance paint for kitchen cabinets. I'll use the detail fine finish nozzle. How much do you recommend thinning the paint? Thanks!

Asked by: AlFotsch
Thin with water up to 20%, but 10% will probably work. You can also a 1 ounce of Floetrol to help it level better, per container of paint. Test on practice piece before the cabinets. Call for more help at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-07-08

I want to put a Marine Spar Varnish on my wooden patio furniture. Do I need to thin it or use as is out of the can? Setting for 'sealer'? Thank you. Used my sprayer last year to paint/stain my huge deck and it worked perfectly.

Asked by: Robert in SC
For a furniture finish with Marine Spar Varnish we suggest using the Detail Finish front end nozzle and thin the varnish 5-10% with mineral spirits. Power up and material flow down for the best atomization and apply a wet coat with each pass. For more tips call us at 1-800-328-8251
Answered by: Technical Support
Date published: 2019-07-08

Is the 890 an “airless” sprayer?

Asked by: Sam62
It is not airless. Airless systems use a piston style pump to move paint mechanically. The Flexio 890 is an HVLP (High Volume Low Pressure) sprayer that uses a turbine to produce airflow for atomizing liquid. On paint cans the description is almost always about an airless sprayer and the specifications that are required. These are completely different specifications than HVLP. That does not mean that HVLP cannot spray or that airless is the only way to spray a certain product. For help deciding which sprayer is right for your projects, call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-07-01

Does the 890 allow for pulling the paint/stain supply directly from the paint/stain container...including 5 gallon buckets?

Asked by: Stev
The Flexio 890 cannot draw paint from the 5 gallon bucket. That is why we make the Flexio 990 - https://www.wagnerspraytech.com/products/paint-sprayers/flexio-990-paint-sprayer/
Answered by: Technical Support
Date published: 2019-06-24

What is the difference between the Flexio 890 and the Flexio 5000?

Asked by: LouLu91
The main difference between the Flexio 890 and Flexio 5000 is the design of the iSpray front end. The new nozzle designed iSpray front end comes with Flexio 5000 will provide paint control with a uniform and contained pattern. Also, the new paint flow dial is numbered for precise and easy setting for the range of coatings the Flexio can spray and easy clean up.
Answered by: Technical Support
Date published: 2019-11-08

will the 890 work to paint kitchen cabinets

Asked by: saitek82
Yes the Flexio 890 can paint your cabinetry. Use the Detail Finish front end nozzle for fine atomization. Thin latex paint 10% with water, spray from 6" away and apply a wet coat with each pass, not 5 passes to get it wet. If the gun spits, power up and paint flow down for better atomization. For more spraying tips call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-05-29

What is the Newer Model 890 or the 4000 ? What are the differences? Coan I find a comparison chart of the ?000 and the XXX models ? Thanks

Asked by: Fieldboss48
The 890 is the old 5000, the 690 is the old 4000. If they have 3 digits, they're old models, 4 digits means they are new. And the difference? The new iSpray front end has fewer parts and a slightly better spray pattern. Otherwise, they are the same. For more help contact us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-11-08

I just bought the Flexio 890. I have never used a paint gun before and I'm wondering if I will need an air compressor for this? If so, what CFM is required?

Asked by: Sydny
This is a self contained spray system, no outside parts are required.
Answered by: Technical Support
Date published: 2019-05-05

Why would my sprayer be continuously spraying with the trigger not engaged?  And it draws paint into the blower tube.

Asked by: TGrose
The sprayer should not spray without the trigger being pulled. Give us a call at 1-800-328-8251 and we will assist you with the issue.
Answered by: Technical Support
Date published: 2019-03-08

What is the difference between the Flexio 890 and the Flexio 4000? Do they have the same pump and sprayers? Either better than the other?

Asked by: BillC
The Flexio 890 is the old version iSpray front end and the Flexio 5000 is the new version iSpray front end. The Flexio 690 is the old version iSpray and the 4000 is the new version iSpray front end. The performance is essentially the same with all four systems. The physical setup is slightly different. The 690/4000 has a 16' air hose and no storage, the 890/5000 has 11' of air hose and a hard shell case for storage. For more help call us at 800-328-8251.
Answered by: Technical Support
Date published: 2019-01-02

Do you sell a 20’ hose for the Flexio 890?

Asked by: AGR29
Sorry no, we do not offer a longer hose for the Flexio 890. For further help give us a call at 800-328-8251. Thanks for your inquiry!
Answered by: Technical Support
Date published: 2018-12-03

I just purchased a FLEXiO 890 and was wondering if the Gen 2 p/n 0520006 spray gun for the FLEXiO 5000 will fit my existing hose?

Asked by: ed4ster
Yes it will.
Answered by: Technical Support
Date published: 2018-11-03

Can the 890 draw direct from paint container (1 gallon or 5 gallon)?

Asked by: Kent
The Flexio 890 cannot draw paint directly from a can, but we do make the Flexio 970 to do exactly that! https://www.wagnerspraytech.com/products/paint-sprayers/flexio-970-paint-sprayer/
Answered by: Technical Support
Date published: 2018-09-17

how much does the 890 weigh in hand?

Asked by: deb2paint
The Flexio 890 with the iSpray front end, without paint in the container, weighs about 3 lbs. The detail finish nozzle, without paint in the container, weighs about 2 lbs. For more detailed answers call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-09-05

How to unclog my spray tips?

Asked by: Gonso
The front end of the 890 is removable. Separate it from the gun handle and break it down into individual parts in the sink. Rinse each part until clean, reassemble the sprayer and load with water to test and make sure it is clean and clear. To prevent clogs you can thin the paint slightly, strain the paint, stir the paint with a mixer in a drill or add a flow agent (Floetrol). For more tips call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-08-14

How do I know if my spray tip is broken?

Asked by: Gonso
On the Flexio 890 we do not have a part called a spray tip, but the parts that can be broken would be the nozzle, air cap, connecting nut. It would be an obvious break as these are plastic parts. The symptom might be a really bad spray pattern to one side, or constant spraying of material. If anything should happen give us a call at 800-328-8251.
Answered by: Technical Support
Date published: 2018-08-14

why would my power box not turn on??

Asked by: cchunk
There are two switches on the Flexio 890. One on the box (turbine) and then you have to pull the trigger for it to actually run. If this isn't working give us a call at technical support, 800-328-8251.
Answered by: Technical Support
Date published: 2018-07-30

Can you use this with Thompsons Water Sealer

Asked by: Sarg
Yes you can. We suggest at least trying it with the Detail Front end as it has a smaller nozzle and sprays thinner materials better. Feel free to call us at 1-800-328-8251 if you have any further questions.
Answered by: Technical Support
Date published: 2018-07-08

How many watts is the turbine rated at?

Asked by: cliu122
The Flexio 890 operates at 600 watts.
Answered by: Technical Support
Date published: 2018-06-21

We have just purchased the Wagner flexible 890 spray kit which of the two spray guns is best for spraying outside larch fencing panels, also should I set both adjustments to zero and open slowly to reach the best spray pattern for the job ?

Asked by: Scottie
We suggest the iSpray front end nozzle for spraying large panels. Set the power to max but keep the paint flow low and move it up until it out runs you, then cut back slightly and paint from about 8-10" away. Good luck with your project. For more tips and tricks call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-04-25

What's the maximum input voltage as I need it in overseas activity?

Asked by: Jo233
The Flexio 890 sold in the USA is 110V and we do not suggest the use of a transformer with our sprayers. We make tools for around the world. Here is a link to find a location overseas - https://www.wagner-group.com/en/consumer/service/service-for-consumers/servicenumbers-international/
Answered by: Wagner
Date published: 2018-04-11

Can the Flexio 890 be used to spray precatalyzed white topcoat laquer, and if so, can it be sprayed on full strength or does it have to be diluted?

Asked by: BobBehr
Only water and oil based coatings can be used with the Flexio line. Look here for our sprayers for furniture finishes. http://www.earlex.com/
Answered by: Wagner
Date published: 2018-04-06

Can a Flexio 890 be used to apply BEHR PREMIUM® Wood Stain & Finish Stripper? The BEHR website says, "Due to product thickness, DO NOT use pump, paint or other sprayers. Product will clog tip, resulting in leaking and dripping."

Asked by: Eric Sr
You should not attempt to spray paint stripper with any Wagner sprayers.
Answered by: Wagner
Date published: 2018-04-03

How does this sprayer work with stain?

Asked by: Joe J
The Flexio 890 can spray water or oil based stain with either front end. Use the iSpray nozzle for the fence or deck and the detail nozzle for trim or woodwork for a finer application. For more tips and tricks call us at 800-328-8251.
Answered by: Wagner
Date published: 2018-03-28

What is the difference between an 890 and a 5000?

Asked by: Karin
The 5000 is the newest version of the 890. With a tighter spray pattern, less parts to clean and an easier way to adjust the paint flow. Good luck with your projects.
Answered by: Wagner
Date published: 2018-04-20
  • y_2020, m_9, d_30, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_122
  • loc_en_US, sid_024964218806, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_wagnerspraytech
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 162.86ms
  • QUESTIONS, PRODUCT
Stay Connected

Find out what’s new from Wagner including product news, exclusive email offers, promotions and more.