FLEXiO 590 Sprayer

$ 159.99
The FLEXiO® 590 handheld paint sprayer is a flexible solution for any type of home painting project. It can paint a wall 10 times faster than a brush or put a fine finish on furniture saving time and effort.

The FLEXiO 590 comes complete with two nozzles, one for big surface projects like walls, ceilings, exterior siding, and fences and the other for small projects and fine finishing on cabinets and trim. The power to spray unthinned coatings with adjustable control, full coverage and low overspray makes any painting project easier.

Cleaning is faster than a brush or roller with a few removable parts that rinse clean, and it all stores neatly in a hardshell case.

Covers an 8’ x 10’ surface in:

-Stain: 1 minutes
-Latex: 5 minutes

Videos

FLEXiO 590 Setup
FLEXiO 590 Setup Video
FLEXiO 590 Spraying
FLEXiO 590 Spraying Video

Features

  • Covers an 8’ x 10’ surface in one to five minutes and can spray up to 8.0 gallons per hour
  • X-Boost turbine delivers the power to spray unthinned interior and exterior paints and stains
  • Innovative iSpray nozzle provides fast coverage with a light texture finish
  • Pattern adjustment can be horizontal or vertical and wide or narrow
  • Detail finish nozzle for small projects and fine finishes
  • Adjustable paint flow to match covering speed and project size

Parts and Accessories

P/N 0529224
Air Cap for iSpray Front End (Black Needle)

Air Cap for iSpray Front End (Black Needle)

$7.99
Buy Now
P/N 0529225
Spray Jet Kit for iSpray Front End

Spray Jet Kit for iSpray Front End

$8.99
Buy Now
P/N 2343747
Nozzle for iSpray Front End (Black Needle)

Nozzle for iSpray Front End (Black Needle)

$4.99
Buy Now
P/N 0529005
Check Valve Kit for iSpray, Control Finish and Detail Front Ends

Check Valve Kit for iSpray, Control Finish and Detail Front Ends

$5.99
Buy Now
P/N 0417465
Nozzle Gasket for iSpray Front End (Black Needle)

Nozzle Gasket for iSpray Front End (Black Needle)

$4.99
Buy Now
P/N 2303366
1.5 Quart Cup for iSpray Front End

1.5 Quart Cup for iSpray Front End

$9.99
Buy Now
P/N 0529013
Detail Finish Front End

Detail Finish Front End

$39.99
Buy Now
Flexio 590 Sprayer is rated 3.4 out of 5 by 133.
Rated 1 out of 5 by from Junk, do not buy! Worked great out of the box. After a THOROUGH cleaning, next time globs of paint spew out, another complete disassemble and cleaning, same thing. It is literally impossible to clean this thing as if it is brand new out-of-the-box, that is the only way it works well. Into the dumpster.
Date published: 2020-05-08
Rated 1 out of 5 by from flexio 590 what a piece of junk used it twice and stopped working in the middle of a job and it wont turn on anymore.
Date published: 2020-04-27
Rated 1 out of 5 by from Terrible experience - BEWARE! I bought this a few years back for a painting job that I ended up not having to do, and I kept it in great storage conditions since then. I finally pulled it out to refinish a kitchen table top. I read the instructions, and I watched three hours of YouTube videos. I had the table top sanded down beautifully. I loaded the paint sprayer container, practiced on included target sheet, and then went to spray the table top. Following the instructions, I pulled the trigger just a bit to get the air flowing and then it happened - huge globs of paint begin “burping” out on to the pristine table top. It was a mess - A COMPLETE DISASTER! This happened on the second coat as well. And, after calling customer service and doing what they suggested, it happened when I applied the water-based lacquer. HORRIBLE!
Date published: 2019-12-01
Rated 1 out of 5 by from Leaks and just doesn't turn on I've had this for about 3 years now, and I've used it only a handful of times because it's terrible. It's a complete waste of money. It leaks terribly and will spray for 5 minutes then completely shut off. I tried trouble shooting but just ended up wasting paint, time and energy. It's going in the trash. I'll never buy another Wagner product because they would likely be as useless as this after the first use.
Date published: 2019-11-05
Rated 1 out of 5 by from junk used one time for 1/2 hour next time it ran a little bit and quit wagner no help had it to long took it apart motor brush holder broke cant buy motor wagner said need to buy whole new unit ? 150.00 for half hour use china junk will never buy wagner graco seems to work a lot better
Date published: 2019-09-26
Rated 1 out of 5 by from disappointing! I bought Flexio 590 four months ago in Russia. It worked fine until some paint got into the motor. I don't know why it happened for I followed your manual. Your authorized distributor replied that this is not a warranty case. And I can't repair this engine even for money as you don't supply this motor to Russia. Turns out it's a one-shot sprayer.
Date published: 2019-09-22
Rated 5 out of 5 by from Great Product I have had this sprayer for several years and it is still working great. It's took a little time to learn how to use the sprayer. I have painted the exterior of a moblie home less that 1/2 a day using this. I have stained a fence over 600 ft with oil base stain. This product is as good as the operator wants to be. I have purchased several differnent types of sprayers and for my projects today and in the future, this is the one.
Date published: 2019-08-13
Rated 1 out of 5 by from A complete waste of money! This sprayer is a complete waste of money if you want a nice even smooth finish, which I would think would be the main reason why someone would purchase a sprayer. Multiple people in my family attempted to get this result and were unsuccessful. People who worked construction and two who are engineers were unable to achieve the desired results. Again, do not waste your money on this piece of junk. Using this sprayer was enough to force me to hire a professional painter to finish the project. It is too late to get my money back, so I just want to warn people about this sprayer before they waste their money on purchasing one at Home Depot.
Date published: 2019-07-25
  • y_2020, m_5, d_25, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_133
  • loc_en_US, sid_024964214105, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_wagnerspraytech
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 59.93ms
  • REVIEWS, PRODUCT

How do i find out what kind of spray gun i have?.

Asked by: Shonkey79
You can look at our website for a match. You can look at the cover of your owner's manual. Or contact us directly at 1-800-328-8251. https://www.wagnerspraytech.com/
Answered by: Technical Support
Date published: 2020-02-11

I'm painting kitchen cabinets, would the 590 be able to apply benjamin moore's advance satin paint.

Asked by: Cabinet
Yes it can. We suggest thinning your paint 10% with water and use the Detail Finish front end on your Flexio 590. Spray your project from 6" away and adjust the sprayer for maximum power but cut down on paint flow to eliminate spitting. Then apply a wet coat with each pass, not 5 passes to get it wet. Lay the project down (as much as you can) and spray down onto it, this way gravity helps it to level. For more tips call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2020-02-11

I will be painting kitchen cabinets. I will be using Behr cabinet and trim enamel. Would the Flexio 590 or 3000 be able to handle this paint?

Asked by: Cabinet
Behr is the only paint company that says not to use their paints in an HVLP sprayer. For help choosing the right sprayer for your project call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2020-02-10

Do all three of these come for that price

Asked by: Ferrill
The Flexio 590 comes with the Detail finish nozzle and the iSpray nozzle, along with the turbine and a case to store it safely. For more details, call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2020-02-10

Is the device suitable for the Israeli outlet?

Asked by: Ronensho12
This product is powered by 120volt 60 hz electric and cannot be used in Israel. You may want to contact or office in Germany at this link, https://www.wagner-group.com/en/contact/. They can help you find a distributor in your area that will have a sprayer that will work in your country.
Answered by: Technical Support
Date published: 2019-12-23

What is that little brush call that is used to clean the sprayers tubing? I misplaced mine and I dont see it in the part section.

Asked by: boosiedunn16
It is just a small cleaning brush. The part number is 0514209 and it can be ordered from us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-08-29

Can use this for primer and sand for texture?

Asked by: Carri67
Paint and primer is fine, but we do not suggest using sand in the paint sprayer. This is our texture sprayer and it does not spray paint - https://www.wagnerspraytech.com/products/surface-prep-tools/power-tex-texture-sprayer/
Answered by: Technical Support
Date published: 2019-08-19

My spray gun is not picking up any paint

Asked by: Mpc54301
It never does pick up paint. The cup is pressurized with air, which pushes paint up the tube and into the gunhead for spraying. Without that pressure the gun "doesn't pick up paint". The first place to look is a 1/16" hole, just below the white foam seal that is on the pick up tube. There is a picture of it in the manual too. For more help call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-08-15

trying to use the 590 flexio to spray stain made by cwf flood. i am getting no atomization that i would expect , it comes out in little droplets and not even coverage

Asked by: millturn
In order to assist you we will need to know which front end or nozzle you are using. Feel free to call us at 1-800-328-8251 and we will assist you.
Answered by: Technical Support
Date published: 2019-08-05

Which sprayer nozzle should I use for cabinet doors if I am using Hadlock Advance paint. I’d like a smooth finish. Can you suggest spray gun settings. 

Asked by: Vicru
Your sprayer comes with two front end or nozzle assemblies. The iSpray Nozzle/front end (the larger one) will spray some unthinned coatings including latex paint and stains and is ideal for big surface projects such as spraying walls, sheds, fences etc. It will provide a roller-like or slightly stippled finish. The Detail finish nozzle/front end (the smaller one) is used for fine finish projects such as spraying cabinets, furniture, doors, trim etc. It will provide a smoother, finer finish than the iSpray Nozzle. Depending on your material, the Detail Finish Nozzle may require some thinning of your material in order to spray properly. If you have never sprayed with this sprayer before you should try it out with just water first, it is easier to learn about the settings that way. Once you add the paint experiment on a spare piece of wood or cardboard first. You can try starting with the recommendations in the book or at the mid point and adjust from there. The lower the settings can be, as long as the pattern looks good, the better off you are because you will use less paint and have less overspray (even though you shouldn't have much anyway). Make sure the end of the gun is six to eight inches from your project. Feel free to call us at 1-800-328-8251 if you need further assistance.
Answered by: Technical Support
Date published: 2019-07-22

What is the funnel’s part number for checking the thickness of the paint. And where Can I buy one? 

Asked by: Cyc5255
The viscosity cup is part #153165, give us a call to place an order at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-06-27

What’s difference between flexio 590 vs 3000 sprayer 

Asked by: Kaival
The main difference between the Flexio 590 and Flexio 3000 is the design of the iSpray front end. The new nozzle designed iSpray front end comes with Flexio 3000 will provide paint control with a uniform and contained pattern. Also, the new paint flow dial is numbered for precise and easy setting for the range of coatings the Flexio can spray and easy clean up.
Answered by: Technical Support
Date published: 2019-06-17

what's the difference between the Flexio 590 and Flexio 3000

Asked by: darrow
The main difference between the Flexio 590 and Flexio 3000 is the design of the iSpray front end. The new nozzle designed iSpray front end comes with Flexio 3000 will provide paint control with a uniform and contained pattern. Also, the new paint flow dial is numbered for precise and easy setting for the range of coatings the Flexio can spray and easy clean up.
Answered by: Technical Support
Date published: 2019-06-11

What is the difference between the 3 digit model number series? For example a 590 and a 3000?

Asked by: jim1
The Flexio 890 is the old 5000, the 690 is the old 4000. If they have 3 digits, they're old models, 4 digits means they are new. And the difference? The new iSpray front end has fewer parts and a slightly better spray pattern. Otherwise, they are the same. For more help contact us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-06-10

Can I use my Wagner Flexio 590 Detail finish nozzle paint sprayer (the smaller one) for spraying Melamine paint on my kitchen cabinets. It is really thick and thinning is not recommended for this paint. Any suggestions?

Asked by: Andy H
Yes, for any fine finish you should use the Detail Finish nozzle. You can thin up to 20% without affecting the quality of the paint. For more tips call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-05-15

Bought 2.5 years ago..didnt use it until last fall...did my fence...this paint a small wood project died...piece of.....

Asked by: Terry kentz
We're sorry to hear about your sprayer. We have terrific technical support at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-04-17

I didn't find a video for a unit that would paint the entire house including a ceiling.

Asked by: Bobert
For house and ceiling painting look at our HEA airless sprayers here - https://www.wagnerspraytech.com/?s=hea
Answered by: Technical Support
Date published: 2019-04-15

are the sprayers made in the US?

Asked by: kredd
The Flexio sprayers are manufactured in China.
Answered by: Technical Support
Date published: 2019-04-11

I just got a replay to my previous question asking for a spare part of the Flexio 590 blower. "it did not meet all our website guidelines." Does that mean there is no spare part for the Flexio 590 electric motor blower?

Asked by: Alfa
We do not sell parts for the turbine motor itself. Please contact us at technical support for help at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-04-11

Where can I get an electric motor DOMEL replacement since it just burned out? The part says 459.3.251 but I can not in DOMEL's page. Is there a replacement part? I want to try to replace the motor/blower before I through the entire Flexio 590 to the trash

Asked by: Alfa
We do not sell parts for the turbine motor itself. Please contact us at technical support for help at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-04-11

What is the wattage of the Flexio 590?

Asked by: James T
The Flexio 590 operates at 550 watts.
Answered by: Technical Support
Date published: 2019-01-08

Do I need to use a specific paint with this gun

Asked by: Sam1
Any water based or oil based paint, stain or finish is just fine in any Wagner sprayer.
Answered by: Technical Support
Date published: 2019-01-08

Is there an attachment that would enable my 790 to draw paint directly from a 5 gallon pail of paint? I am painting a large area and find that constantly having to refill the material container is annoying.

Asked by: DAVE01
There is no attachment to draw directly from a 5 gallon pail because the Flexio 590 does not actually draw material up from the container. When the motor is turned on and the trigger is pulled it forces air into the container through the little tube on top of the nozzle/cup assembly. That pushes air up the suction tube and out the front of the gun. The Flexio 970 or 990 has a pump attached that will allow up to use a gallon or 5 gallon container. Feel free to call us at 1-800-328-8251 if you would like to discuss this or have further questions.
Answered by: Technical Support
Date published: 2018-12-25

Can an updated ispray 3000 front end fit onto a 590 body

Asked by: Deanm4334
Yes, it will fit onto it just fine. For further help give us a call at 800-328-8251 . Thanks for your inquiry.
Answered by: Technical Support
Date published: 2018-10-22

Can you spray sealer?  Like Thompson’s I’m sure but what about polyurethane?

Asked by: Robs
To spray polyurethane you should use the detail finish front end. This will give you better atomization for a nicer finish. It shouldn't require thinning, but you can thin up to 20%. Adjust the sprayer to eliminate spitting, usually caused by too much fluid in the air. Cut down on fluid flow to eliminate spitting. For more tips call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-10-02

Can i use this to paint ceiling ?

Asked by: boblow
Yes you can, but it should only tilt up to 45 degrees up.
Answered by: Technical Support
Date published: 2018-08-31

Will it spray silver flake in paint

Asked by: Rosko
We don't suggest the use of particulate in our sprayers as it can cause premature wear and tear on the needle/nozzle section of the spray gun. This can affect the warranty on those parts, but they are replaceable. For more help call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-08-10

when will the sprayer be delivered after making my payment and how much is first payment

Asked by: johnny g
For answers regarding retail orders on our website please contact Digital River at -http://store.digitalriver.com/store/wagner/help Phone: 1-866-585-3251
Answered by: Technical Support
Date published: 2018-08-12

Do you sell replacement motors or turbine

Asked by: Allie
The turbines are not replaceable. Most other parts are replaceable. On our website you might find refurbished sprayers for a less expensive option. www.wagnerspraytech.com
Answered by: Technical Support
Date published: 2018-07-25

have flexio 570 lost fluid materials container, can I buy from you and how much

Asked by: Pistol Pete
You can buy them from us directly, give us a call to place an order at 800-328-8251.
Answered by: Technical Support
Date published: 2018-07-23
  • y_2020, m_5, d_26, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.8
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_181
  • loc_en_US, sid_024964214105, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_wagnerspraytech
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 175.38ms
  • QUESTIONS, PRODUCT
Stay Connected

Find out what’s new from Wagner including product news, exclusive email offers, promotions and more.