Control Spray Sprayer
$
74.99
The Control Spray applies coatings evenly with control and efficiency. It is great for thin materials such as stains and sealers that are used on outdoor projects such as a small deck or refinishing lawn furniture.
Adjustable patterns and material flow make the Control Spray easy to use to get the desired results.
Make quick work of your projects with set up taking less than five minutes and clean up in less than 10 minutes.
Adjustable patterns and material flow make the Control Spray easy to use to get the desired results.
Make quick work of your projects with set up taking less than five minutes and clean up in less than 10 minutes.
Videos
Features
- Applies coatings up to 4.1 oz. per minute
- Control Finish nozzle sprays a smooth and consistent coverage
- Designed for light-bodied materials: stains, sealer, urethanes, varnishes, and finish-grade enamels
- Pattern adjustment can be horizontal, vertical, and narrow round
- Adjustable paint flow to match covering speed and project size
Parts and Accessories
Control Spray Finishing Sprayer is rated
out of
5 by
8.
Rated 5 out of
5
by
Set Builder from
Easy To Use and Achieve Great Results
The Control Spray Finishing Sprayer is intended to be used outdoors with polyurethane or other light weight finishes. I needed to spray a recently built mobile work cart, and I wanted to use paint - not a recommended use. The weather has been too rainy to paint outside, so I worked in my garage with the doors open and ample drop cloths. After diluting the latex paint with 10% water, I was able to achieve very professional results. The only issue I had was the spray stopped without warning - until I realized the suction tube had become dislodged. After reattaching it, the Control Spray performed like a champ. Being able to spray a wide horizontal or vertical stripe is to be expected, but when the nozzle is set at an angle a much more precise pattern can be attained. This came in handy when I was spraying the legs of my cart. Over spray was a bit of an issue until I backed off the amount of material being sprayed by spinning the small dial on the trigger. (I should have practiced more with water.) Clean up was quite easy - though I suggest investing in an inexpensive spray gun cleaning kit (<$15) to get into the nooks and crannies of the sprayer so it's spotless for the next job. All in all, I found the Control Sprayer to be lightweight, flexible to maneuver and I really appreciate how it stands up and doesn't tip over when the cup is attached. I highly recommend the Control Spray. My mobile work cart looks amazing.
Date published: 2018-10-23
Rated 5 out of
5
by
Dear Mr smokey Wagner pro from
Look at Mr Wagner go
Mr Wagner is working just fine on the job site priming cabinet door and drawer faces
Two thumbs
Date published: 2018-10-15
Rated 5 out of
5
by
Jossmar from
Saves time
I like to restore old furniture, and this sprayer has helped me a lot to save time and get a nice finish. Great for applying urethane. I have many ideas and pending projects and I count on this sprayer to achieve the expected results.
Date published: 2018-09-18
Rated 4 out of
5
by
Dominic from
Great sprayer
We needed a sprayer to do some finish work on our son's fence and deck. There is a bit of a learning curve, but reading the instructions always helps. We were able to finish up the fence and lattice work. The only drawback was the paint cup was a little small. Otherwise, we really like this sprayer!!
Date published: 2018-09-08
Rated 5 out of
5
by
Randy81 from
Everything I was looking for
I bought this sprayer to apply a clear water based poly on new kitchen cabinets. This worked great, did not require me to thin the material, was easy to control, and saved me a ton of time. Well worth it for what I needed. I will be testing with some oil based paints tonight(Not what I bought it for), if it pulls this off, I will really be impressed.
Date published: 2018-09-07
Rated 5 out of
5
by
Jim the Painter from
Great product...easy to use!
I had it out of the box and ready to use within 10 minutes. It’s very light weight, which was great because I needed to hold it in one hand while holding onto the ladder with the other. I was able to get the whole fence sprayed within about 45 minutes. You have to refill it pretty often, but it’s worth it to keep the weight of the device down. If I had to do this job with a paintbrush, it would have taken me half the day. My neighbor was so impressed with the quick work that he asked to borrow the sprayer for his side of the fence.
Date published: 2018-09-04
Rated 5 out of
5
by
verbinater from
ability to control paint flow
I received the control sprayer a few days ago and tested it out, I found that the ability to adjust paint flow made a very good difference. It's very hard sometimes to paint something and get a light coat of paint evenly put on. But using this sprayer I was able to do that. I feel that this sprayer is going to get a lot of use in my home.
Date published: 2018-08-30
Rated 1 out of
5
by
HMac from
Leaks from the trigger
I used it the first time and it leaked so I cleaned the trigger. The second time I used it paint was running down my elbow. Its sprays very well. it should not be giving such problems after such limited use.This is the fourth one Ive bought because it has the best working system ...when new. But after the first use its a problem. I'd give high ratings without the leak but with it I cannot. I've had to use plumber's tape around the seal for it to stop leaking. Maybe the seal mechanism is defective...I shouldn't have to do that to get it to work as it should.
Date published: 2018-06-03
Id like to know what gun would be recomended for doing spray tans? Also, is there a special tip that would go in the gun for a spray tan product?
Thank you for the inquiry. Please check out this website https://www.aurasprayers.com/contact/#contact
Aurasprayers is located in the UK but under contact they have distributors in the US. Please give our technical support a call at 1-800-328-8251 if you need further assistance.
Date published: 2020-01-22
Where can i buy an extra bottle for the paint
We have parts in stock, call us directly at 1-800-328-8251 to place an order.
Date published: 2019-11-20
I have a hvlp control spray pn 0417004. I don’t have a manual. I’ve chatted but the attachment sent won’t open.
We hope with our third attempt that you were able to open the attachment.
Date published: 2019-08-30
I purchased a paint sprayer for my husband & we only got the part that hold the paint. The turbine was not in it. Can you tell me where i can find & how much that part would be,
We're not sure what you purchased, but the iSpray front end nozzle and the Detail Finish nozzle both fit our Flexio sprayers which are sold are Lowes, Home Depot, Menards, Walmart, etc....For more help deciding which sprayer to get, call us at 1-800-328-8251.
Date published: 2019-08-26
Hi, I was at Lowes and I saw your Wagner Control Spray 250 Handheld HVLP Paint Sprayer. My question is, can I use this sprayer for primer (I just purchased from Lowes the Zinsser Mold Killing Primer).
Yes you can, but it may require some thinning. We don't suggest more than 20% because that will affect the paint. But 5-10-15% is just fine. Spray from 6" away and apply a wet coat with each pass. For more tips call us at 1-800-328-8251.
Date published: 2019-05-20
What is wattage of this product?
250 watts of raw power! Great for thin bodied materials, like stain and polyurethane. Good luck with your project.
Date published: 2019-03-18
I leave in Greece, a friend of mine sent me the sprayer from america, will it work in 220ac too ? cause in america its 110ac.
It will not work with 220v. We do make sprayers for 220v, we just don't sell them in America. Here is a link to our international web page where you can find help closer to home - https://www.wagner-group.com/en/consumer/service/service-for-consumers/servicenumbers-international/
Date published: 2018-09-28
Is minwax helmsman spar urethane semigloss sprayable with a Wagner control spray PLUS HVLP?
It is sprayable, but it may require some thinning, 5-10% should do it. Most Minwax products are thin enough already. For application tips call us at 800-328-8251.
Date published: 2018-06-06