Control Spray Double Duty Sprayer

$ 84.99
The Wagner Control Spray Double Duty HVLP Paint Sprayer uses high volume, low pressure technology and AC power to provide a continuous spray.

The two-stage air turbine provides a professional fine finish ideal for staining your deck or refinishing your cabinets. The sprayer is ideal for applying thin materials such as stains, sealers, urethanes, varnishes and lacquers.

For use with oil based or water based coatings and for indoor or outdoor projects.

Videos

Tips & Tricks Spraying the Best Finish
Tips & Tricks  Spraying the Best Finish Video
Tips & Tricks Spraying Technique
Tips & Tricks Spraying Technique Video

Features

  • Up to 4.9 fl. oz. per minute
  • Two-stage, indoor/outdoor rated air turbine provides a fine finish
  • Adjust the air cap to one of three positions for a vertical fan, horizontal fan or round spray pattern
  • Allows you to apply thin materials such as stains, sealers, urethanes, varnishes and lacquers; can be used with thinned latex paint
  • Two material cups-one quart for smaller interior work and 1.5 quart for larger exterior work

Parts and Accessories

P/N 0417323
Air Filter for Handheld HVLP Sprayers (Single Pack)

Air Filter for Handheld HVLP Sprayers (Single Pack)

$1.49

Buy Now
P/N 0414368
Control Finish Nozzle Air Cap

Control Finish Nozzle Air Cap

$6.99

Buy Now
Wagner Control Spray Double Duty is rated 4.5 out of 5 by 32.
Rated 2 out of 5 by from Turned off suddenly I've used this sprayer for a grand total of TWO projects. The sprayer turned off suddenly while trying to stain a fence which is what the sprayer is intended for! I reached out to customer support lets see what happens, will update my review as I learn more about the customer service for this product. The sprayer worked well while it lasted but if I am only able to get two uses out of it then I would say it isn't worth the price
Date published: 2019-05-02
Rated 1 out of 5 by from Will not spray! I got this sprayer to paint my house because rolling seemed to take too long. I followed the instructions for the paint manufacturer for if paint needed to be thinned or could be used as is. I tried going slow, going a bit faster, holding it 6 to 8 inches from work. Basically went through every trouble shooting guide there was to make this thing work. Went to run water through it to clean it out and it worked fine spraying the water. So I tried to thin my paint a bit more with water (using water based paint) and still nothing. Maybe I got a faulty sprayer. But seriously disappointed that this sprayer is not working!
Date published: 2018-10-25
Rated 5 out of 5 by from Easy & fast. Bought for my deck & wood bridge. Very easy to use. Results were better than expected.
Date published: 2017-08-05
Rated 5 out of 5 by from Project: Stain my deck and pergola with ease I was a little hesitant to use a sprayer for my deck as I am true believer in using a good brush to apply stain, but my wife said we should try it as it would save a lot of time. As a smart husband, I said YES!! This project would normally take me a whole weekend. When I used the Wagner Control Spray Double Duty it took me 3 hours to do my project. Awesome!! I would, however, recommend putting plastic on your home or anywhere you don't want stain to go as a slight amount of overspray can occur. Clean up was a breeze! I would recommend this product to anyone looking for great coverage in a staining project, and to save time.
Date published: 2016-06-29
Rated 5 out of 5 by from Excellent for the beginner or experienced user I've been with Wagner many, many years and have used primarily their sprayers. This particular sprayer caught my attention for a couple of reasons. One, it's dual material usage and two, the fact that it could be used indoors or out. The price on this model wasn't bad either considering all it's capable of doing. I originally bought this to paint and seal a trellis of my wife's and this sprayer was the perfect choice! It sprayed the material with ease, laid it right down where I wanted it and in the amount I wanted all while being surprisingly quiet! Additionally, this sprayer is easy to maintain and clean which is a real plus for me! I don't have time to spend the rest of my day cleaning a sprayer and Wagner with this sprayer made clean up a breeze. If you're considering buying a sprayer for the very first time or just need an occasional sprayer for those odd jobs, then this is the sprayer you want! It sprays both water and oil based paints and does so with great efficiency and is very stingy on the paint!
Date published: 2015-07-29
Rated 5 out of 5 by from Stained my whole raised deck in one day. Single handed. This sprayer did a great job, was easy to use and didn't need to be refilled as much as I thought. It did great on the ladder and in every crevous. It cut out randomly from time to time but I'm guessing that's an overheat feature. Easy to clean. Great product.
Date published: 2014-09-28
Rated 5 out of 5 by from Very easy to use and clean I bought this sprayer to finish staining our wood patio furniture. Painting by brush was taking my son and me hours. Spraying was so much easier and faster-and the results were great. The modular construction of the unit made it a piece of cake to clean. I'm kind of looking forward to the next project, which for me is something since I hate painting.
Date published: 2014-07-21
Rated 4 out of 5 by from Stopped working I was using it quite nicely. Results were excellent. But suddenly it stopped spray. I cleaned nozzle and other part well. But it throws air into the container but not spraying paint. I can not understand.If gun will send air into the container then how the paint will come up to nozzle. Please explain working.
Date published: 2014-07-10
  • y_2020, m_1, d_17, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_32
  • loc_en_US, sid_024964180738, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_wagnerspraytech
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 58.69ms
  • REVIEWS, PRODUCT

The thinning chart in the Wagner Spray Double Duty sprayer does not show run out time in the thinning chart for a latex enamel product. What is the runout time for this paint type?

Asked by: Morning Dew
The Control Spray Double Duty is designed to spray stains, sealers, enamels, and other thin finishing coatings. It is not designed to spray latex paint, although we have had people call us and say they have sprayed latex after thinning it. If you have further questions feel free to call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-08-05

Can we use latex paint in this sprayer

Asked by: Anonymous
The Control Spray Double Duty allows you to apply thin materials such as stains, sealers, urethanes, varnishes and lacquers; it can be used with thinned latex paint. We don't suggest thinning paint more than 20%.
Answered by: Technical Support
Date published: 2019-07-30

I need the yellow nut that screws on the nozzle assembly for wagner dual duty spray painter. I have nozzle assembly just the the nut to hold in on. Anyone know where I can get one or makeshift something? Thanks

Asked by: suej
You can order parts from us over the phone at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-07-22

How do you set up the sprayer? I cant even spray water?

Asked by: Dlizbeth
The Control Spray Double Duty is designed to spray thin bodied materials so it should spray water. Has it been used before? If so there may be debris clogging it. Give us a call at 1-800-328-8251 and we will assist you.
Answered by: Technical Support
Date published: 2019-05-07

Can you spray oil based paints (such as Rustoleum) with this sprayer?  If so: Do you have to thin the paint?  Is this the sprayer you would recomend tp paint a steel trailer frame or steel shelving?  What model would work best?

Asked by: Philco
The Control series works best with thin bodied materials like stains and poly. Our Flexio HVLP has more power for bigger jobs and thicker fluids. A trailer frame would be fine with the iSpray front end, unthinned Rustoleum would work fine. For the steel shelving, you probably want it to be a nicer finish, use the Detail Finish front end nozzle and thin the Rustoleum about 5% with mineral spirits. For more tips call us at 1-800-328-8251.
Answered by: Technical Support
Date published: 2019-04-25

Please answer the previous question asked - "What is the spray tip size?" i.e. Air orifice diameter. This information is of utmost importance to anyone considering spraying paint. Thanks.

Asked by: Douglas
The Control Finish nozzle is 1.8mm.
Answered by: Technical Support
Date published: 2019-04-25

Hi, Do you have 220V one for Singapore voltage requirement.

Asked by: chopins
https://www.wagner-group.com/en/consumer/service/service-for-consumers/servicenumbers-international/
Answered by: Technical Support
Date published: 2019-04-22

What size is the spray tip? Paint im using says no thinning required if its airless with a 0.015-0.019" spray tip.

Asked by: Jay1
The Control Spray Double Duty is not an airless sprayer. It uses air to atomize the material. It is good for spraying enamels, polyurethanes, and stains. Latex paint will need to be thinned out to spray it. For further help give us a call at 800-328-8251, thanks!
Answered by: Technical Support
Date published: 2019-04-24

Can double duty sprayer be used with acrylic paint?

Asked by: Wilson
The Control Series Sprayers are for staining and finishing small to medium sized projects and are capable of spraying low viscosity coatings. The FLEXiO Series Sprayers are a flexible solution for any type of home painting from small to large projects. The FLEXiO Series has X-boost turbine which has more power and the ability to spray thicker coatings such as latex paints and primers.
Answered by: Technical Support
Date published: 2018-10-29

The product page notes that it can be used with oil & water based paints, but I have read some other reviews that suggest the unit will not work with water/latex paints. When thinning latex paints do you suggest thinning with water or a thinning agent?

Asked by: mjc15202
The Control Spray Double Duty is for staining and finishing small to medium sized projects and are capable of spraying low viscosity coatings. The FLEXiO Series Sprayers are a flexible solution for any type of home painting from small to large projects. The FLEXiO Series has X-boost turbine which has more power and the ability to spray thicker coatings such as latex paints and primers. Latex paints need to be thin with water.
Answered by: Technical Support
Date published: 2018-10-27

How do I get a wider flow of paint to apply? Adjusted everything we can and still a narrow coverage area.

Asked by: Niki1973
Distance and paint flow are the best controls for pattern width. Typically you should spray from about 6" but to make the pattern wider go to 8". Paint flow also adds to pattern width, more paint equals a wider pattern. Keep in mind that the thicker the paint, the narrower the pattern will be overall, thinning slightly will also make the pattern spray wider. Good luck with your projects, for more help call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-10-08

I am trying to find a replacement nozzle as mine just broke.

Asked by: Michael L
We have them in stock, give us a call at 800-328-8251.
Answered by: Technical Support
Date published: 2018-08-22

I have this gun but lost the actual container that holds the paint. Do you sell that separately

Asked by: Jose Batres
Yes, you can purchase the material container separately. It's part number 0413301. You can call for more information at 800-328-8251. Thanks for choosing Wagner!
Answered by: Technical Support
Date published: 2018-08-04

My sprayer seems to be working fine, BUT it is not pulling paint. When I stick the tube in the open jar, it blows air bubbles into the jar.

Asked by: Bowrites
Yes it does blow into the cup. That is how it gets pressurized to push paint out of it. (There is no pulling or picking up paint.) Look at the white foam gasket attached to the pick up tube, are there cross shaped slits in it? Push you finger through those, air has to get through them. For more help call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-07-06

Can I paint a car with it I got it used and was wandering

Asked by: Jon a
We do not recommend painting cars with this model. It will not give you the type of fine automotive finish you'd want on your car.
Answered by: Technical Support
Date published: 2019-01-29

CAN I USE AN ACRYLIC ENAMEL IN THE WAGNER CONTROL/DOUBLE DUTY SPRAYER?  IF I CAN, WHAT SHOULD THE VISCOSITY NUMBER BE?

Asked by: BENEWAH
The Control Spray Double Duty is meant for thin bodied materials like stain and oil based enamel. Water based paints will require sufficient thinning in order to spray. Possibly up to 20% thinning may be required, but we don't suggest thinning any more than 20%. For more info call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-05-23

Can you spray a product like Dry-lock with this unit

Asked by: brownb
Drylok cannot be sprayed with HVLP. It is best applied by roller.
Answered by: Technical Support
Date published: 2018-05-11

Can this device be used to spray polyurethane into porch cieling?

Asked by: Jforney007
It's perfect for polyurethane, but it can only tilt up to 45 degrees to paint a ceiling. It can be done, but it's easier with our Flexio 690 which gives you a hose between the gun and the turbine which means you can tilt the gun to 60 degrees up, without issue. For more details call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-05-13

Can I spray solid color latex deck stain (Behr or Sherwin Williams) with this unit? Any special attachments or tip needed for this type of stain? Which Wagner unit would you recommend?

Asked by: Lenzale
The Control Spray series was intended for use with thin bodied material like semi transparent stain. We suggest a full out painter for solid color stains, like our Flexio HVLP line. The 590/3000 or the 690/4000 both come with two front end nozzles for the most ability. The iSpray nozzle is perfect for thicker stains on your deck and the detail nozzle works great for finer finishing, like your cabinets. For more information call us at 800-328-8251.
Answered by: Technical Support
Date published: 2018-05-01

part number 0414352 nozzle for double duty where is it available on this site or in Canada? I have lost mine. Thanks

Asked by: dave in the valley
Give us a call to place an order at 800-328-8251.
Answered by: Technical Support
Date published: 2018-04-25

Want to use gloss enamel rustoleum paint to spray a metal garbage can will the wagner 0518050 work on this project

Asked by: Dude wilson
Any oil based or water based paint or finish can be sprayed with the Control Spray DD as long as it is thin enough. Oil based paint may require up to 20% thinning (start at 5%) with mineral spirits to spray well and level out. For more tips call 800-328-8251.
Answered by: Wagner
Date published: 2018-03-30

How do I go about getting a new container seal be on your manual

Asked by: Waller 74
You can order parts from us at 1-800-328-8251.
Answered by: Wagner
Date published: 2018-03-05

Can I use this sprayer for exterior railing with latex paint?

Asked by: Desert Painter
The Control Spray Double Duty is designed to spray stains, sealers, enamels, and other thin finishing paints. It is not designed to spray latex paint, although we have had people that have called us and said they have sprayed latex after thinning it. You may want to look at our Flexio 590, 3000, 690, or 890. If you would like to discuss this or have further questions feel free to call us at 1-800-328-8251.
Answered by: Wagner
Date published: 2018-03-05

I purchased the Control Spray Double Duty gun.  I intend to spray my interior doors and trim. My concern is that it might not be sufficient for using water based alkyd enamel melamine finish like that from Behr paints.  Will it work with this paint?

Asked by: Peskycat
The Control Sprayers are meant for thin bodied material, like stain and polyurethane. Thicker materials will require thinning and testing to know how it will spray. Our Flexio line of HVLP has more power, to help them spray thicker fluids like paint. For more answers contact us at 800-328-8251.
Answered by: Wagner
Date published: 2019-06-16

Hi, I purchased a DOUBLE DUTY CONTROL SPRAYER. I like to know if I can purchase the DEPRESS TRIGGER for it. Please, let me have part number. Thank you

Asked by: Franky
All of the available parts are shown and listed in the owner's manual. For questions about other issues please contact technical support at 800-328-8251.
Answered by: Wagner
Date published: 2019-09-26

So will this sprayer shoot water base latex. If so what do I thin it down too?

Asked by: Scooby doo
The Control sprayer series does better with thin bodied materials like stain and polyurethane. To spray latex will require thinning about 20% with water. For more tips contact 800-328-8251.
Answered by: Wagner
Date published: 2018-01-15

Can this be used with tile refinishing epoxy based kits such as Rustoleum or Homax to paint a bathroom vanity countertop?  

Asked by: Labsat698
As long as it cleans up and thins with water or mineral spirits, it is just fine. But it may require some thinning for the best spray pattern. Clean immediately after use as these products tend to dry quickly. For more tips call us at 800-328-8251.
Answered by: Wagner
Date published: 2018-01-03

What is the best compressor to use with this sprayer?

Asked by: PaintGirl
This is an HVLP sprayer that uses a self contained turbine to produce airflow, no compressor is needed.
Answered by: Wagner
Date published: 2017-11-28

Can this gun shoot metallic flake with no problems?

Asked by: Nickabbott
The Control Spray Double Duty is designed to spray stains, sealers, enamels, and other thin finishing paints. It will not spray anything with metallic flakes because they will get caught in the tip. If you would like to call and discuss this our number is 1-800-328-8251.
Answered by: Wagner
Date published: 2017-11-26

Can this sprayer be used to spray single stage polyurethane, such as Pettit paint EZ Poxy.

Asked by: Tomsz
After reading the EZ Poxy information we feel it should spray just fine. It may need some thinning and be sure to follow their detailed instructions for great results. For more info call technical support at 800-328-8251.
Answered by: Wagner
Date published: 2017-11-16
  • y_2020, m_1, d_16, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.4
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_79
  • loc_en_US, sid_024964180738, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_wagnerspraytech
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 166ms
  • QUESTIONS, PRODUCT
Stay Connected

Find out what’s new from Wagner including product news, exclusive email offers, promotions and more.