A deck is great decorative and functional space where families gather for barbeques, birthday parties and loads of other fun activities. Taking care of your deck will extend how much use you can get from it. Power washing and staining can add years to an already highly useful area.
Preparing and cleaning the surface is one of the most important parts of the staining process. Follow these simple steps to ensure your job looks great and lasts for years to come.
Step 1 Inspection & Repair
Before prepping the surface, repair or replace any loose or broken boards.
Remove or re-nail any boards that may be loose. If nails or screws are needed, use non-rusting galvanized nails or screws.
Step 2 Cleaning the Surface
Before you begin power washing, you should remove everything from the surface of your deck (e.g. grill, table and chairs, flower pots, etc.).
Sweep any loose debris off the deck. Time saving tip, use a leaf blower to remove any debris.
Hard water can create spots on glass that are difficult to remove so cover windows close to the surface of your deck to prevent extra work later on.
Large water filters can be rented to treat hard water coming through a power washer.
This part of the process is very important. Without power washing your deck, the stain will not apply evenly due to marks, debris or other items obstructing the material from reaching the surface.
Once your safety goggles are on, go to the farthest corner and start spraying while moving the 15-degree tip left to right just perpendicular to the decks surface. (You can go as wide as you'd like as long as you are comfortable.)
Maintain, the same distance from tip of the washer to the deck surface throughout the cleaning.
Keep a minimum of 12 when washing the railings so that you do not put a groove or pit your material.
By consistently staying with the pattern in the wood you know where you have started and stopped during the cleaning process
Once the power washing is finished let your clean deck dry for three days. Make easy work of your staining project with a Wagner Deck Mate, Paint Crew and Paint Crew Plus.
Step 1 Cleaning off your deck
Take a look around your newly power washed deck and remove all surface debris before you begin the staining process.
Step 2 Protect your deck
Before you start staining with your Wagner Deck Mate, reference the products owner's manual and go over all of the warnings.
Also, invest in a high-quality stain or sealer, this will protect your deck better and extend the life and have less maintenance in the future.
Step 3 Begin staining your deck
Place the pad flat on the deck boards and begin staining. To completely saturate the surface, use a back-and-forth motion following the grain of the wood. Always finish the stroke toward the rounded end of the pad. This will prevent streaking and ensure an even coating.
Using the Wagner Deck Mate makes it easy to apply a consistent amount of material with its small brush located on the bottom. This applies material between the deck boards giving it a clean, professional look.
Step 4 Cover the railings
It's okay to apply the material by brush, however it will take you longer.
Using the Wagner Control Spray Double Duty or Power Painter to spray the material will definitely be quicker while giving you a professional look and finish that will last.
Pro Tip Spraying can have less wear and tear on your body and reach those hard to cover places such as railings, posts and underneath the deck.